Search results for query: *

I finished installing new carpets in my '70 Charger, then reconnected all the wires at the driver side kick panel. Everything matched up except for this odd connector. I could not find it's mate anywhere. This is coming down from above, not from the rear of the car under the wire cover. What is...

I got finished installing my carpets, the location of the accelerator pedal frustrated me. I figured since the pedal position is probably the most important part of the carpet installation, all I'd need to do is get it located at the top right corner of the heel pad, mark holes and everything...

Exactly. Aftermarket covers are huge. I cut my tray. Then find a battery to fit.

Same tray . makes no difference if Hemi or slant six

It's Blue, but it also had Chrome.

Its important to have the rear centered as well as the front. The support wires in the rear rod and pulling it forward. The rear should hang until you get all the front and sides fitting good. Then you can glue them and move on to fitting the rear and sail areas.. Myself I would of got it...

or just get a stand-alone ignition and a new coil, run a line from the battery with a relay and tie into the power at ignition switch, no guess work, option.

Just realized that my valve covers are probably the problem. Gonna have to think this one over. Thank you

Can someone tell me if the battery tray is different for a Hemi ? The tray that I have seems a little too wide. Old race car, battery was in the trunk. With new stock harnesses, was trying to put things back into there stock location when I ran into this. I have a parts catalog, but can...

69 Datsun B210

Thanks DB. So do you mean just run a normal wire instead of the test light?

Bottom line is that If you want to convert to a points type system, first thing you need to do is get a points type distributor that's correct for your engine size. That's not what you say you now have. From there, if you follow the previous thread posted by Halifaxshops, that's a basic wiring...

Hey Guys Im helping a friend wire the dash for their 70 charger He installed a under dash speaker and using an aftermarket Retrosound deck. How do I wire the single front speaker with a single positive/negative terminal Can i hook it either to the FR or FL speaker wire from the deck?