Search results for query: *

Pair of 440 hood emblems. One is good condition original and one NOS original. $60 pair Two PLYMOUTH hood emblems, good condition, one has a few pits. $20 each Road Runner fender emblem, very good condition. $40 set I have a very clean original 69 Roadrunner airgrabber style hood for sale...

A one-wire alternator bypasses everything and requires a volt meter because the factory ammeter cannot handle the current and would turn itself into a fuse and you’d be left without any electricity to run the vehicle once you shut off the engine. Because the vehicle electric system is...

I use a cap of some sort to keep tapping the tip to keep it wet. Works great. You have to keep pressing the tip back and forth into the pen itself.

Thanks for the help. Engine is at 3 percent. Project is getting close to being ready for 1st drive.

I will try those next time. Thanks.

Good question. Looking at the engine, the upper left bolt hole should be open to the lifter valley. Oil will pool on the other side of the china wall and eventually run into the hole and dribble down the thrust plate (if the bolt has a hole in it). My engine didn't originally have a bolt...

These pens are awesome for the real chrome look. I didn’t have any trouble at all. 24 hours between coats.

Do those have a hard porous tip? I have one, another brand with a hard porous tip. It was not so easy to use and the paint rubs off on your hands forever unless you clear coat it. I sprayed out some light silver paint in to a cup and brushed it on.

The whole car says "hey look at me!" The radio fits.

Not sure if this helps or not.

I ordered a distributor (points). Should be ready this afternoon.

Happy birthday Mr T Ha!

NOS Mopar Performance 426 Hemi Mega block Siamese bore 4.19". Untouched from Chrysler. Not machined for lifters. The intent of this block is for people wanting a very high performance, high rpm build. You can spread the lifters out to 2.00" spacing to help straighten out the pushrods, or you can...

Oriflow was the oem supplier I believe. Finding true OE equipment is gonna be damn tough and stupid expensive if you do. Finding them under a superseded number will be easier and a good bit cheaper. BUT they are not true OEM when it was new. But looks and drives the exact same I bought all...

I may be missing something here. I have a 522 stroker in my car. I ran into some problems trying to use a mechanical fuel pump pulling thru an electric that was not running. There are electric pumps that you can pull thru but not all. Use one or the other with a regulator and gauge.

Got it off Ebay 6'' x 60'' Clear Door Sill Edge Guard Protector Paint Film Vinyl Sheet Universal

garbage can is a little to close for me.

did you get an answer on the column? I can take pics of my 70 tomorrow for you if need to.