Search results for query: borgeson

just FYI if you are going from power steering to borgeson you don't have to modify the column at all..

You only have to shorten if you had manual steering i believe.. a PS column is already too short for a borgeson, thus the longer adapter.. It's bout 1.5" longer than stock

put it on marketplace for $100.. better than trashing it.. someone will buy it.

Go with Peter Bergman. I used his Borgeson box kit and the steering column to Borgeson adapter was a great solution.

I have a Borgeson box sitting right beside the headers lol. I figured I'd get headers now since I have to pull one out to install the box.

Can you fit a Borgeson box, it’s brand new and modern.

Cleaning up and have this for sale. Borgeson Fits just about all B-Body’s, check the link. Summit $800 plus shipping.

I found some damage and my power steering pump's pulley. Borgeson makes a new pump, it's there 800338. Only thing is, it's a 6 3/4" pulley and the one I have is around 4 5/8". Does anyone think this would this cause any problems besides maybe a bigger belt?

I bought a Borgeson kit from Bergman. Happy with it. Only thing I ran into on my 65 was my original box to k frame bolts were smaller diameter than the holes in the box. I made sleeves for the bolts and went with it.

The trip to Van Nuys few weeks back. I had Rich pull on the bracket as I tightened it. The belt was tight. Either the pump is not up to the task, the belt slips despite adequate tension or the Borgeson unit just needs greater pressure. I don’t know where the problem lies just yet.

Thanks for the response. So I went ahead and installed the remanufactured box from Autozone. But after looking at it I'm fairly confident it's a Lares brand box. It appears to be doing alright. I've not driven it much. The only problem I had was I heated the original crush washer to restore its...

Is the box truly "On Center" The input shaft on the Borgeson doesn't have a locator so it can be assembled in any position... If you are one spline off you'll have slop it what you are using as "On Center" The reason for this is the true center is ground to a tighter tolerance that the rest...

What part of the box is welded? I don't have pics of mine, but I just purchased/installed it last month.

Well a Borgeson it is

I put that pump in my car. I had to chip away at a bump on the block that was threaded. I really still need to take a little more off. The return line robs up against that spot when tightening or loosening the pump. The original pump had a damaged pulley and was making noise. The new pump is...

Looks like this OER. I'd contact them for adjustment instructions. https://www.jegs.com/i/OER/691/MN6542/10002/-1 Also... https://www.classicindustries.com/product/mn6542.html

If you decide to go Borgeson, get it from Peter at BAC.

I've heard good things about the borgeson conversion.

thanks for this! My box was installed not too many miles ago and I'm running a new (rebuilt) Saginaw pump. Less than 300 mi so far, but no noise or issues. I'll keep this info about the tuned Bergman box on file as a backup in case any future issues occur.