• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Search results for query: *

  1. icetech

    Rust removal, better than evaporust and 10x cheaper..

    that leaves an odd color.. look pretty clean though
  2. icetech

    Firm Feel Suspension + Wilwood 6 Piston Disc Brake Project

    yeah, i like a softer ride but zero chance on the nice roads :) i do have fat tires that help a bunch.. i have Excel-g's on the rear.. got them cause the are softer than the gas-adjust, had to get the gas ones for the front though, they don't make excels for the front... Last shocks were...
  3. icetech

    Firm Feel Suspension + Wilwood 6 Piston Disc Brake Project

    i don't know if KYB has changed but i have 4 on my car right now and they ride really good.. i had read horror stories but no issues here.. P.S. i know everyone wants expensive shocks for handling.. but they also usually make the car ride like a brick and on michigan roads it is horrible to me...
  4. icetech

    62 Belvedere 318 poly granny cruiser (one day i hope)

    yeah i have some old rock hard 14s that would be good enough to test with
  5. icetech

    DLC Lifter break-in success. Budget 440 build.

    The solids are tool steel... I was hoping they made a solid set at the price of the hydraulics...
  6. icetech

    62 Belvedere 318 poly granny cruiser (one day i hope)

    Drove in today.. so much nicer to drive.. but i have a bit of a miss at cruise speed, pretty sure it's carb related. Going to look for a cheap holley to replace this street demon. Can get a used 650 for about as much as a tuning kit for this thing.. Before i do any of that i'm going to throw my...
  7. icetech

    Firm Feel Suspension + Wilwood 6 Piston Disc Brake Project

    1.03s here and i 100% love them.. i was afraid they would be stiff but the car rides pretty much perfect, and i have a alum head small block, so not a ton of weight up front
  8. icetech

    green noise or blue?

  9. icetech

    Firm Feel Suspension + Wilwood 6 Piston Disc Brake Project

    ah.. didn't know that..
  10. icetech

    DLC Lifter break-in success. Budget 440 build.

    ahh.. that seems more reasonable :) i was looking at the solids...
  11. icetech

    DLC Lifter break-in success. Budget 440 build.

    Am i looking at the right lifter? $124 Per lifter?
  12. icetech

    62 Belvedere 318 poly granny cruiser (one day i hope)

    Yeah, motor is running good but starts stuttering as soon as i hit second, i can rev to the moon in first and it's fine though.. problem for another day
  13. icetech

    62 Belvedere 318 poly granny cruiser (one day i hope)

    K.. Fuel pump changed.. no more weird engine noises, Alignment better, steering wheel is straight.. slight pull to the right but i think it's the crown in the road it's soo small.. Moved the trans a little to the passenger side which got a header tube off the torsion bar.. what a difference in...
  14. icetech

    Are these OK? Fuel line adapters for Carter to Edelbrock fuel pump.

    I just replaced it with a new $23 carter special.. no weird noises at all, it's soo much nicer, that was soo bad it sounded like something was trying to escape the motor
  15. icetech

    Are these OK? Fuel line adapters for Carter to Edelbrock fuel pump.

    ahh nice.. i thought they were 7-8... i will probably end up with one.. the price is killin me. The cheap one i have in sounds like it has a rod knock and is going wocka wocka wocka... great stuff :)
  16. icetech

    Are these OK? Fuel line adapters for Carter to Edelbrock fuel pump.

    did you need a regulator with the 1723?
  17. icetech

    On an LTD frame? WHY?

    it's a common swap... it's very cheap to do.. you get a reliable suspension/brakes/engine/trans... EFI.. heat/AC... i personally hate it.. but seeing why people do it isn't hard...
  18. icetech

    Is this starter battery cable lug too close to the block? Dakota mini starter on a 440.

    It's "Probably" fine.. but i'm a worrier... it's $12 and 20 minutes to fix it and never worry again....
Back
Top