Search results for query: *

Welcome from the central coast of Cal.

That double front bumper though...

Does anyone have any pictures or measurements for the Hotckis weld on sway bar tab placement? I order a set but the tabs and a receipt were the only things in the box. I have my control arms blasted and want to weld these on before I paint and rebuild the control arms.

They make pully shims. Mr. Gasket 6129 Mr. Gasket Universal Water Pump Pulley Shim Kits | Summit Racing

Both the alternator and power steering belts aren’t perfectly aligned with the water pump and damper pulleys. It seems the water pump is about a 1/16” off and about the same for the power steering. You can see the belt that was installed is starting to fray on the sides. The power steering pump...

That might be useful at the cinema or the opera on big hat nights.

How bout a nice 4 wheel drive monster Dart/ General lee- its for sale! [No- its not mine] [

I would never do a triangulated 4 link. That is a whole nother discussion. I respect classic "torque arm" set-ups, but have no experience with them. This will be a typical 3 link set-up and will see 100x? more road course track time than drag time, which is a main determining factor.

A real 67 440 Charger? Out of 660, not alot left to choose from. Just a hair more than the daytonas

Make sure all the parts are in the reverse detent as well. Other wise there can be interfernce with the reverse fork. I left the ball out once. Couldn't get it to shift in 2nd. Doug

I found a Road Runner wood grain steering wheel pad/adapter, turn signal switch/lever, plate, column insulator & bearing. Black door panels, arm rests/bases/ash trays. pedal pads, lower dash pad, lower switch panel and circuit board for my 1969 project.

I was more concerned it's a repro NON MW cross ram. I'm not too up on the values.. I'd put a indy SP on it and enjoy :D ( if it's MW port heads..)

64 Sport Fury 426-S street wedge (B-body) 67 440 Charger I think either could be had in comparable condition for $30-$40K. If you ever wanted to sell and/or move onto something else, those two would be easier to sell than this modified 65 Sport Fury C-body. And neither of those '64 SF or '67...

Don't drop the pan. Buy a pan gasket. Replace the front rubber seal with the one out of the new gasket kit. Remove all small peices of the cork gasket at the front of the pan. Use good quality RTV ( I like Ultra Grey) to seal the corners where the cork was previously. No need for any cork. Use a...

So what's a used repro MW cross ram worth? They are $1900 new. So maybe a $1250-1500 intake. And a used gear vendor $2K.

Ha ha.... Are your eyes like this: Or this?