Search results for query: borgeson

No, it is as Bradfly posted. The noise is from the borgeson box and it is transmitting up through the steering column.

Did you run into any noise issues running up the column with that coupler?

Bergman's Borgeson swap kit doesn't require the steering shaft to be cut.

While you’re replacing the box, you should look at the Borgeson box.

I Like how your Looks. Did you have to cut column. Thanks

Hi just noticed your old post. Have to ask did you have to shim your borgeson box. I didn't shim mine yet.

...units, not just a seal replaced and coat of black. If you want to step up your game, BAC, one of our sponsors, can hook you up with a Borgeson box and ALL of the needed pieces to put it in your car. Anything else is a waste of time. Parts store stuff is something to stay away from. Doesn't...

...some things that once they are gone, nobody will tool up to reproduce them. I have stock steering boxes in most of my cars but I do have a Borgeson in one of them. Numbers matching pertains to VIN, fender tag and the ID #s on the engine and transmission. The steering box has no VIN, just...

The factory box sat at the same angle. It's just that the Borgeson box is a lot smaller so the angle is more noticeable in the void where the original box once sat. There was no noticeable difference driving the car with the Borgeson box on the angle or with it aligned. It was just my OCD...

If it was I, Borgeson would be the choice. We installed the complete set up in a 64 Dodge station wagon. Drives great. Very impressed. I am saving to do the swap on my 63 Belvedere.

Bergmann got everything right when I bought a Borgeson box and Bergmann coupler.. Questions were answered instantly, all the right parts shipped quickly to the right place on the other side of the planet. I wouldn't go anywhere else now. Glad they're a FBBO sponsor.

I got the borgeson also and I’ve never driven a nicer old Mopar.

Would you be able to weigh what all the new components weigh vs stock ones? Curious what the weight savings is?

...a 1973 date code. I have no idea what has been done to this engine prior to my ownership. I upgraded the front end to Disk brakes and a Borgeson power steering unit. While bolting my new Power Steering pump in the bolts that bolt into the water jacket pulled out because the holes were...

...The Firm feel st3 got the feeling like a modern car and i felt more connected to the vehicle movements. (I dont have fast ratio arms.) The Borgeson was nice but a tad on the light side for my taste. Now after shimming it feels awsome, more fun to drive. People on forums have shimmed their...

...out of Ohio? are prime, CORRECTLY redone units. Stay far, far away from parts store or online places for a reman. If you want to update to a Borgeson unit, look no further than Bergman Auto Craft, Peter. One of our forum sponsors. He may not be the cheapest way on that, but you'll get ALL of...

Yes, stud holes farther apart. Doing this project in conjunction with a Borgeson box and Bergman tie rods install. Just eyeballing things now as I’m just seeing where spindles are pointing but I’m concerned about things like new steering gear being centered and needing to run tap farther into...

...in the 1969 Charger 383 the power steering pump with this one: More Information for BBB INDUSTRIES N7222103 Also I have installed a Borgeson Quick Steer Box Wich fluid its good to use please? And capacity? Thanks in advance and best regards PS: I replace the pump because make noise (fluid...

I was looking at the complete kit from Jegs but I’m open to suggestions. It’s the same kit I found on the Borgeson website but I could use a promo code and also free shipping. It comes with the new gearbox, pump, lines, and the coupler.

...lower control arms will get dropped off for some powder coat. Rear springs are on the way from Kansas. Need to rustle up the sway bars and Borgeson box/pump, front suspension/steering stuff from the gent in NY. Already have the 1.06 t-bars, Bilstein shocks, FF upper control arms[ was going to...