Search results for query: *

New lower price!

Here is a picture.....I buy at it local auto paint vendors.

Sorry for the late response. CMA stripper is called strip it dry. First time using it and I love it. It has strong fumes like the other ones that work and will burn your skin with contact. So wear a mask and gloves. It is a gel so will cling. Let sit for about 15 min and you will see the surface...

I have a pair of new rubber bushings for the front leaf spring eye. NOTE: These are the 2" OD and not 1-1/2". Normally these sell for at least $45 new. I am selling these for $10 plus $15 for US shipping. Thank you, Wallace

I am in the process of stripping the paint on a non-Mopar that had prior body work. What I found is that in many places, surface rust formed under the filler that was applied on bare steel. Bondo absorbs moisture and this can easily happen. This showed up on the paint surface as tiny pimples...

I do have the round foam gasket that goes between the spindle and the backing plate. But does anything go in this groove on the backing plate? See attachment. If nothing goes in there, what is its purpose? Thanks!

I have a brand new poly urethane mount from Brewer's purchased in 2022. 1966-70 B/1967-72 A-BODY TRANSMISSION MOUNT , POLYURETHANE - Mopar A833 4-Speed Transmission & Component Specialists I bought new for $69 and selling for $30 plus US shipping. Please PM me if interested. Thank you, Wallace

New set of seat belt retainer clips for rear bench seat. These were purchased from AMS obsolete with an original cost is $30. These are molded parts NOT 3D printed. I am selling this set for $10 plus $8 US shipping. Please PM with inquires. Thank you

Thanks for the replies. I started with the top one and the new repro clip left a slight bulge in the vinyl after chiseling the board out as you pictured. Maybe it was the repro clips not sure. I just didn't want that bulge and so went with the Xmas trees. Anyway, it is done now. There was a hole...

I have seen one that was stamped metal and then the wire clips. I thought the stamped metal version was on early 60s. Any others? Using the Christmas trees make the issue of any misaligned holes and the time to cut the holes out go away. Took 5 minutes to install with the trees.

I gave up on the wire panel clips. 1) Too hard and time consuming to cut the openings 2) the cut outs were mostly in the wrong place on the Legendary panel 3) almost impossible not to have a lump show on the vinyl side. What I used instead is a Christmas tree fasteners with a 9/32" diameter...

Sale pending......

Offering a package of 36 Door Panel clips still in the bag. OER MM2367 fits a wide variety of B bodies. Typically $30 retail for clips only - I am selling for $16 which INCLUDES US shipping.

I Have a question about the clip placement on the rear panel. I measured the position of the holes for the clips on the inner Qtr. panel and compared those to the cut outs on the door card. See attached. The black "+" are where the holes in the inner panel are.They basically match up except for...

Now $75 WITH shipping in the US. That's $60 for the gear set or half price the price from 440 Source.

Without.

That is a great solution.

I have a brand new and still in the box gear set from 440 Source. Billet 3 Bolt 3 Way Adj. Timing Chain Set - New I am selling for $75 including shipping within the US. 440 Source price new is $126. Thank you, Wallace

Ok and thank you.

I bought a gear set for a roller cam (102-1004) from 440 source that does not have the Torrington bearing. Can you buy that separately and install or is the cam gear machined especially for the Bearing? I do have the cam button. Had no idea about the cover flex and good to know. Great thread!