Search results for query: *

Just went back out to the car… i definitely have a 3 speed wiper, and all 3 speeds work as they should. I can shut off a number of times, and parks in same place each time…..if i put wiper blades on, goes bazurk! Starts out going further down then up about 1/2 way. Is there any chance with a...

So…. Why would my “autopark” act up?

Im gonna have to revisit this motor again in the morning…. Im thinking it COULD BE a 3 speed, not sure

I thought it was ok when I repeatedly turn the switch on and off, and it seemed to auto park in same spot… threw the arms on, turned on the switch- bam! Arms go “further down” onto the cowl grille and back up then i turned off and they stopped in middle of windshield! Cant trust it, gonna wreck...

For “To service the "park switch"”, does this require removing the motor?

So im having issues with the wiper motor that came on a car i bought that needed reassembly. Finally getting to the wipers…. They work fine, both speeds and off. I’ve tried without the arms on. But for some reason this motor has auto park and it never does in the same spot. After a quick picture...

I would tend to agree with that, however, motor has not run in the car, so im guessing the original owner left the seal off? Should i cut that plastic ring off for now? Any safety issues driving car like it is?

Are there any safety issues if i do not get to this right away? Should i just cut the nylon piece off? Did you see any issues with the angle of the steering column where it enters the steering box coupler? Thanks again

68 Charger-See picture… what is this loose plastic ring? Where does it belong? And looking closely at the steering coupler area, as that slight angle (not straight) should be a concern? Thanks

See pic of 68 charger rear outside window chrome… how does this get mounted between body and window felt? Maybe just slides in behind the window felt? Note: rear glass is installed…

Appreciate all the input!!! Waiting to hear back from Bendpak for concrete requirements

So what is it that you don’t like on newer one as opposed to the older? The lift im looking at is also the MD-6XP

Price? Vendor?

This is the one im looking at:

So other than the drilled and tapped arm holes, any issues lifting your Chargers?

So what’s that supposed to mean

Thanks guys, but trying to see if anyone has the model i named in thread title, and used it under a B body

One of my concerns is i don’t see that this particular model is ALI certified

Curious about pros and cons…. Didn’t know BendPak were made in china

Thanks, not gonna go thru all that. Glad i asked ! Appreciate the input.