Search results for query: *

When I was an apprentice we used to fit rebuild kits to water pumps. I remember a hydraulic press, a few flat plates and some various size pushing bushes was all that was need. You do need to be careful of the mechanical seal. Perhaps there are some videos on You Tube of the process????? Older...

1980's Yukon probably. What a great truck that 1981 was.

Yep sounds like your on the right path. :thumbsup:

The silver shocks are supposed to be 50/50, not digressive, not progressive but equal damping in extension and compression.

@64fury74charger Have you tried the Sparco sliders?

Trying to assist restoring a 69 dodge charger with 318 engine. Put original water pump (driver's side inlet) back on and can't figure out which brackets ( 6 in the box ) are used to hold the power steering pump. Will post pics of car and what I have this evening after work.

? Post a pic of the car you are talking about. The low speed car, DC-74, had the cobbled up nose and stubby wing. It was red and originally a 1968 1/2 built for the Firecracker 400. It was deemed illegal by NASCAR and they told Chrysler not to bring it back. Basically, it was lowered too...

Bigger is always better if you have the space. I use mine to compress the springs in clutch packs when working on transmissions.

1968 Coronet Grill/Headlamp Bezels $125 obo

HF = Horror Freight :p

I have played with several aftermarket seat tracks and like most things these days, they are made with the thinnest material and do not allow any slight adjustment or modification without breaking. I am following along here as well.

That gross bitch in the commercial that puts it under her boobs, in her buttcrack, and other places we dont want to know about. Yeah man, she needs a pressure washer shower.

All too true with my last marriage....

They have new diecast tooling. More Fury models will be released!

Did the backfire start after the intake was fitted?

its both, But it doesnt have to be moved with a Forklift and will do a variety of milling operations. mine does Face milling, ruff cut, rounding, edgeing etc...it was more than enough to modify this crossram intake,,,and it also drills holes . do i wish it was a full on milling machine, of...

The advice to spray clean the bulkhead is very easy to do and should be performed periodically anyway. I use DeOxIt and just stick the wand into each bulkhead passage and squirt. Gently shake the two prong connector wires from the distributor and wiggle the coil wires while idling. See if any...

From what I can determine an A500 or 47RE would be a bolt in to my 1984 318 divorced transfer case 4x4. Not sure what we be easier, an electronically controlled or hydraulically controlled transmission. I know different trans were different lengths, and would need to consider. Trying to find...

Wanting to come up with a price for these headers. Came off my 63 Max Wedge Savoy wagon.