• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Search results for query: *

  • Order by date
  1. crahill39

    FOR SALE 1969 440 Bare Block, Mid 70's 727 Trans, HP Manifolds, and Intake Manifold

    I have advertised all over the FB Charger groups and in here in the past. Nobody so far.
  2. S

    FOR SALE 1966 Dodge Coronet Factory 426 Hemi 4 speed project

    There is 8 pistons and no it’s never been hurt. My buddy bought it and drove it for years. This engine has not been hurt ever.
  3. BSB67

    Carb for a street/strip stroked 440

    What places did you read this? Please share the sources. Can you describe why a double pumper gives too much gas off idle?
  4. PRHeads

    Stall speed

    Does it have a manual valve body? If so, get it high gear rolling along steady at about 15-1700rpm. Stab the throttle, the tac will jump right up to a certain rpm and then pause there. That’s the effective flash stall speed. It only takes a few seconds. If it has a std valve body, you need to...
  5. Coelacanth

    Where to connect a spade for key-on ignition in fuse block, '70 Charger

    It's odd that the FSM has routing for every single wire and connector but doesn't include a schematic for the fuse block...
  6. Aron Gleason

    Stall speed

    What i was told, is to have the car in 3rd gear at about 5 mph then stab the throttle and where the tach stops is what stall you have.
  7. SlinktRR

    Carb for a street/strip stroked 440

    Any carb will do that if the jetting and idle mixture is not set correctly. If you don't want to change the cam, just learn to adjust the carburetor you have. Hesitation off idle..probably lean jetting or insufficient accelerator pump shot. Good luck with your carb tuning journey. I don't race...
  8. dodgeboy440

    Knock Off Intake Manifolds

    Got A Foundry In You’re Neighborhood? Hurry on Down With The CAD file & $$$$$ For the Initial Production Run ! We’re Waiting ! Mopar2ya!
  9. dammstrate

    Stall speed

    Is there any way to tell or estimate the stall speed of a converter without taking the trans out and looking at a part number?
  10. dodgeboy440

    Knock Off Intake Manifolds

    440 Source Rocks ! They’ve been Supporting The Mopar Faithful For Decades ! Parts & Tech ! They Even Are Very Wise In catering To all Economic Catagories Of Mopar Fans . If you want an original EDDY Intake , here ya go !! If You Can’t Quite Swing For The OG ? We Can Help You Too ! You Know...
  11. dammstrate

    Carb for a street/strip stroked 440

    Yes, certainly. But I was hoping there would be some kind of consensus about the question I posed. I learned a lot from the thread, but no easy direction to follow.
  12. 58belvedere

    67 Charger lower steering column bearing.

    Yes, I found the lower seal.
  13. Budnicks

    green noise or blue?

    ...it seems now too, even in the winter keep the house warmer for my (88 y/o) dad, then I really like... I often fall asleep with the TV on internet *MotorTrend's/FastTV, (Xfinity Cable 4080) watch when I 1st get in bed, to make me sleepy anymore no good late-night shows/TV, like there was 30...
  14. GTXDAN

    Do YOU go 3 or more days between showers ???

    I thought the humidity was pretty bad here in GA until I went to Singapore to work. Basically on the equator. Holy crap is it tuff there. The temperature and humidity are about the same every day in the 90s. You walk out of the hotel in the morning and it just slaps you in the face. Makes you...
  15. C

    How do I take this off?

    I pulled it out of a car, but we didn’t notice that damage. But you can tell it’s been like that for a while.
Back
Top