Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
These are 2" Super Competition Hooker headers. Came off my 63 Max Wedge. They are in very good condition. Would think they could possibly fit B body 62-65 rb motors. Asking $450 plus shipping.
So in some ways the original 518's if not ruined for stock eliminator could be less of a problem. Everybody kept telling me 518M's were the real ticket. "Oh, they are better than the original 518"s they say. Maybe so if you get the right pair. So what is there to watch out for on the original...
Carter 3447 carburetors from my 63 Max Wedge car. These are in good condition and work fine. Have more pictures if needed. Asking $1400.00 OBO plus freight.
Wow that would be good to know and how to know if I would buy one. My friend may also have an original set, not the M's. Just have to see if they haven't been ruined. The real question is how does one determine if an M head is bad. Check the runner sizes or see what they flow? Or is it obvious...
You have tried it all. You would think more than 3 tenths. Interesting. I lucked out. Broke one of my heads, but a friend who has decided not to build a stocker motor gave me a heck of a deal on his 518M's. Will have them checked in October when I have a chance to pick them up. If they don't...
I have had the 1405's worked on and should be fine. They can work on the 63's as a 63 car in C/SA I know has run 10.40's with them. Hope my new high compression 63 motor makes some hp close to his. I did run the big tops on the 3447's and seemed ok. Just seemed to idle better with the...
I ran the 3447's for awhile but went to the Edelbrock replacement. Never run those on the dyno but will with the new motor. Having my headers fixed for O2 sensors on the dyno this time. Always appreciate your help John.
Anyone know the original primary and secondary jet sizes and metering rod number on the 3447's. Want to help someone out to put them on a 63 Max Wedge street car. At least a good starting point. Thanks for any help.
I have a Turbo Action shifter. I went to thr hardware store and got a larger diameter plastic roller that I replaced the smaller one on the shifter. Made a bracket for a Biondo switch. Wired it so my 2 step only works in first gear. My switch is on the far left of the pedal. Told my son to be...
Getting ready to get this thing started. You guys running 16v systems do you increase the gap on the plugs with a 16v system. I have a MSD 7AL-2. I know to check the timing to see if that has changed and check fuel pressure with the fuel pump using 16v. I thought that someone mentioned they had...
I did it to have easier starting. My 12v system was an issue, so instead of changing the 12 alternator with something stronger I went with 16v system. More power for the fuel pump (although will change my fuel regulator now), and supposedly more for the MSD. People say I best check the timing...
Thanks for the info. A little work but I think I will put the water pump on 12v just to be safe. Interested to hear you have a regulator on the fuel return as well, if I am reading that right. I will watch the fuel pressure for sure. Don't want to flood this thing.
I installed a 16v alternator and 16v battery, located in the back. Wondering if I should put some things on 12v. I have an MSD 7AL-2, electric fuel pump, water pump (Mexiere), and fan. Some say water pump on 16v actually pumps too hard. MSD should be fine from what I heard. Starters seem to be...