Search results for query: *

Where do I buy a swivel clip for the kickdown rod on a 69 727

Ive got my resto engine on the stand, about to put the heads on it and button it up, its going to be sitting another 6 months. Do the lifters need to be lubricated, to pump them up. Somewhere I read not to do that, But I always have sat them in oil over night before my build. id appreciate yalls...

Whats the best Head Gasket, Stock Engine. I usually just do the Fel Pro thing, but I wondering if I could find a thinner Gasket accomplishing the same thing.

Ive been looking at my options on a good resource for a complete axle rebuild kit, looked at Mancini and DrDiff anything else available, reason I'm asking I'm a novice with the differential and I cut the old bearings off the axles but behind the bearing were what appear to be circular locks...

I just finished my 69 HP short block 383, moving on to head work. Im getting conflicting information on the heads. Is it 79cc or what, for 906's. I see in past post claims that it is never what Chrysler documented. That is much larger as high as 88cc My issue is that I built this engine with...

Rebuilding 383 for my runner its a 89,000 mile motor. Whats yalls opinion on replacement of the intermediate shaft. Is there mutch wear associated with it? Im going to have machinist reinstall a new bushing, is buying a new shaft over kill?

I'M A 340 GUY NEVER BUILT A BIG BLOCK, BUT NOW I HAVE A 69 383 ROADRUNNER, MACHINE SHOP NEEDS TO KNOW WHAT PISTONS TO ORDER, THIS IS MORE A RESTO JOB, BUT WOULD LIKE BETTER THAN STOCK PERFORMANCE, SO THAT BEING SAID, AM I LOOKING FOR VALVE RELIEFS, OR WILL FLAT TOPS WORK WITH A 500 LIFT CAMSHAFT...

I am looking to purchase the 75cc chamber version of the head for my 440 and wanted to make sure of a couple of things before I do. Will the stock 69 HP manifolds work fine with the heads? What sparkplug should be used in reference to its length ? My engine, using flat tops, 509 lift comp...

Looking for information about BB HYD RLR Cam 238/242-110 LSA .360 /.367 lift. I know nothing about Hyd Rollers and this is a suggestion made to me by H. Engines. I like to ask questions from someone using this cams profile...

purchased a driveshaft at a mopar meet recently hoping it was a big block shaft can someone tell me the correct driveshaft length as well as yoke length, the u joints and yoke are still attached. Its for 72 Charger 440.