Search results for query: *

I have a badly leaking steering box on my 69 charger that needs replacement or the seals redoing .My car has Headers and aftermarket exhaust system The garage said that they may need to pull the engine to get the steering box out Is there a way it can be done without pulling the engine as im...

Blank stares of doom at my donor have passed, and it now seems doable. I have started spotweld cutting the donor on the firewall and the bottom of the frame rails, but it's still intact, so I can just weld the ones on the firewall back up. If I understand, the idea would be to use the front of...

What are you doing with that roach & how sore are you today?

I know that some of us have dealt with the issue of getting 6 Pack hard lines to seal. Here is a tip that worked for me. Lightly coat the back and inside of the flare of the lines with Moly assembly paste. It minimizes the friction of the nut on the back of the flare and allows the flare to...

:rofl: :rofl: :rofl: :rofl: :rofl: :rofl:

Their concern is valves hitting the cylinder walls.

What is happening is the vehicle sits higher. The weight doesn't change, the spring rate doesn't change.

Why does TF require 4.320" minimum bore diameter?

.

So what is happening as the LCA ride height bolt is adjusted to increase ride height? Isn’t it using more torsion spring force on the front end?

I didn't know Cojo and RonH were cowboys. Yeehaw! :lol:

And what does unbelievable mean?? I've been doing things since I was pretty young too but seems that no one wants to recognize it lol

The rear wheel studs are a simple swap. Throw away your damaged front drum parts.

Welcome from Macomb :) P.S. that pic is horrible :) had oil on my phone lens...

The FSM will not really answer your question, but I advise reading it anyway. Lots of info in there if we pay attention.

I didn't think it needed to be said but, knock em out and put rightys in. That's the easy part

I bought the OD gearset from Passon for my 70. With all the required parts plus syncros, bearings and seals i will have OD for right at 3k.

The little knife is inscribed,”Family Preview 1972 Dodge Truck” The one on the top says “Drink Cincinnati Cream” I am thinking either a pop or a beer brand I looked it up. It is a beer brand.

The spring rate does not change with height