Search results for query: *

Fran even though I ordered the restoration cable I'm just going to make the 2/0 positive cable to see how that works and then the negative 2/0 cable. The resto cable will probably just take up space on the shelf. Thank Ron

They are 11 years old but certainly not cobbled together I could never relate to that word. If you read my last post cables on the way!! Ron

OK Saturday update: Although I have a restoration cable on the way I'm going to build my own 2/0 for positive and negative. I'll use the smaller red tail from the old cable to go from +battery post to solenoid and also the smaller gray that runs up from starter to solenoid and wrap with...

OK haven,t got outside yet but want to address today's comments. Not sure where the present cables were from but just ordered one from Frank Badalson. As far as M+H cables those are YO sold only and I looked at them but gave Frank the nod. I'll assume his are from there. The last starter was...

OK just to answer some questions and tell what I did today. I made an 10g wire to sort of help the battery cable, the end on the battery cable actually cracked today when I attached the wire. It is since 2015 when car was built so ordered another restoration cable (I'm a gluten for punishment)...

I'm going to make up the additional wire from battery post to starter stud to help positive wire because I can do this cold and see what happens when hot . Working alone sucks when doing stuff like this. Ron

Oops forgot to say, I have had 2 different new dakota starters and just installed a Power Master XS last week which cranks faster so I tryed locking the distributor and it went to slow crank when hot. I now have distributor back to unlocked with 20 initial and it will tolerate that. Ron

OK 72 B-Body 512 stroker, been having this issue for appro. 3-4 years and in turn this doesn't allow me to put enough timing (initial or locking dist.) in to help get a nicer idle. The cam is 245 @ .050 compression is 10.5 with aluminum heads. TTI 1 7/8" coated headers and exhaust, car never...

I noted all my findings on a similar post I have on Moparts. Thank you to all that helped me with this alternator. Ron

Thanks Rick for that search and to RemCharger yes dual pulley A/C car.

This alternator came off my engine back when I redid everything in 2015 and has been sitting. I stumbled over it again today and when I saw the circle with 71 in it I got to thinking could this be the original to my 1972 400HP (P-code) w/air My broadcast sheet calls out F11 so I assume the 11 is...

https://www.facebook.com/AIRGRABBERRESTORATION/ Here is the guy/place to contact to restore you air grabber ductwork. I bought his paint and did it myself with excellent results. Ron

Pete here is another shot with all the studs.

Have you spoken to Dr. Diff about them or made the choice on your own? Ron

I appreciate every reply so far but again not one person has any real world experience with a Dr. Diff unit. I know he's a good vendor but still would like to know if anyone bought his product and how is it? Ron

I've owned an Eaton True Trac without issue but now that I may want another I went to Dr. Diff's site and he states seeing problems with them and sells a unit of his own. 8 3/4" Helical Gear Sure-Grip ("Sure-Trac II") Dr. Diff's unit OR Eaton Detroit Truetrac Posi - 913A572 - 8.75" 8-3/4"...

WTB A known good set of Chrysler Brand ring and pinion gears, 3.55 ratio 489 case. Looked for known good FACTORY gears made by Chrysler from back in the day. Please let me know what you may have. Would need to be packed up and shipped to NJ unless you're local. Thank you in advance Ron

Here are two pictures and it is 10" across at the widest point. It's a day/night but doesn't say that on the glass. TY Ron

I'm looking for a very nice rear view mirror for my 1972 Plymouth Satellite. Just noticed mine has a small crack in the glass. I want to find as nice as possible and yes I know they make reproductions but haven't heard any good reviews of them. TY Ron

1- Set of Dodge Charger/Super Bee Ram Charger door decals and the Air Cleaner care decal Brand new Price $25 Please PM TY Ron