Search results for query: *

Selling a brand new RestoRick Automatic Pistol Grip Shifter Handle. Installing a Tremec TKX 5 speed with a pistol grip shifter instead. Artfully crafted stainless steel pistol grip style handle designed to mount on the factory automatic shifter. Grips are factory style plastic. The button...

Removed the drivers side exhaust manifold. Loosened the passenger side nuts and now have to figure out how to remove the manifold. Guessing i need to jack the motor up for clearance off the studs. Removed the power steering pump and lines. Loosened the steering box bolts. Disconnected the...

All this 302 talk, I took my old Ranchero on the freeway for the first time in years today. Not at all like the later 302s but it got up to 70 mph fairly easily and is always eager to do a little burn out. Seems great as long as I don’t check it against a stopwatch!

Not sure if these have been mentioned, but a vise brake might help with the fab work, they are cheap enough you could modify as need as well.

If I had to pick an English car, it would be a Jensen Interceptor FF MkII, the first 4-wheel-drive production car

The '62 Plymouth is the car that cost Virgil Exner his job at Chrysler.

Did you read in the above examples how many cars got improved idle with MVA?? PVA does nothing for idle.

I would agree if there was any strength to the flat stock ... I don't think that flat does anything than work as a locator for the upright. Good triangulation would allow one portion of the triangle to fail and still allow some strength to remain. I have built many dirt track cars and...

HI OK,, I've talked to some shops and HI, yes Thermostat 180*.. What I've been thinking about it being clogged up inside the out side is very clear you can see through very well... I Live in the capital city here and there is NO ONE that does radiator refurnish , Clean and rod or even repair...

Agreed, here's my crew cab Coronet.

That means it works! :thumbsup:

Funny part from an engineering point of view they're taking off 90% of the shear load off the lower bolts. It's called triangulation .

a C (model year 1967) 9 6 assembly for a 922 Scheduled production date is about right. It's an early in the year car but that really doesn't mean much. Even though the block appears to have been cast in '65, a block is a block is a block. The bare block was obviously in inventory for about a...

again...change to an LED or HID bulb when you install, and both your current draw and your service life issues are addressed. 35w H4 HID, $35 a pair; H4 LED, anywhere from $20each and up. I've run the Hellas in my motorcycles for nearly a decade now, with 35w HID lamps, and zero issues - and...

What’s the casting numbers on the block and VIN? And does it come with the vibration damper?