• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Search results for query: *

  • Before: Oct 25, 2025
  • Order by date
  1. autoxcuda

    What did you do to your Mopar today?

    Thought I had a bad bearing starting to go in the alternator. But got a little louder this morning and just grabbed the solid fan…Clunk… Clunk. Bad bearing. Had an OE casting rebuilt pump that came with car as spare. Right on the shelf. Matching the paint was the hardest thing. Duplicolor...
  2. Triplegreen500

    LED Headlight conversion what to use

    The hellas come with an H4 incandescent bulb. You can (and I did) change it for ANY H4 style light. I run HID in my low/hi units, and LED in my high beams. The Holley, when it fails...you buy a complete unit. Hella? Put in a new bulb.
  3. Don Frelier

    Hello

    Welcome from NY
  4. Don Frelier

    Well THIS was exciting... and unexpected... and dangerous!!!

    It's not just the bolts. You're missing the gusset straps that tie down to the base.
  5. Belvedere408

    Is your job boring?

    I've been working as a maintenance technician at the University of Oregon for a bit. Got laid off my last job. It's not to boring, doing lots of plumbing tasks at the dorms.
  6. J

    Is your job boring?

    We are likely only steps away from an audience exclusively on ear buds with zero delay and distributed sub's throughout the audience controlled by you on an iPad sitting in an easy chair on your back porch on the Gulf sitting in the real sun. BTW, that sure doesn't look like a real warm...
  7. Kern Dog

    Rear shoulder belts in a 1970 Charger

    It was determined that a 7/16” bolt would work to retain the retractors. I wanted to reinforce the area so I used some square washers… I cut some off the bottom to get the hole closer to the bottoms of the bracket. MIG welder… I added a small plate up above the bolt to reinforce...
  8. 493 70 Runner

    Weird non Mopars you like?

    1957 Olds Super 88
  9. Eric Pearson

    Won’t start and no electric

    Use a test light to check for powe at the buld connection. If you have power and still no light check the ground
  10. DeltaV

    3I/ATLAS?

    :rofl:
  11. J

    Is your job boring?

    The current government backed programs are the only avenue to seek compensation, as across the board vaccine financial immunity was enacted years ago, AND the statute of limitations for making a claim was I believe 2? years, so that door has already closed for many. If books are even allowed in...
  12. SteveSS

    3I/ATLAS?

    I tried facebook for a week. Got all sorts of weirdos that wanted to be friends.
  13. RedBeard

    67 Charger - Tailights not working

    Thinks this is shows ok. Red is the light. Blue is the plug.
  14. Triplegreen500

    Is your job boring?

    Still not a boring job...
  15. O

    The Gold Fairy is alive and well . . .

    Congrats Roger! Kim
  16. Kern Dog

    Rear shoulder belts in a 1970 Charger

    I almost fell into the trap that happens when communication is not fully understood. This probably happens in manufacturing where a vendor is tasked with making something based on a set of schematics and prints. The part is made and when it is ready to be installed, it is discovered that someone...
  17. RedBeard

    67 Charger - Tailights not working

    There is a plug for the trunk light on the driver side by the sail panel. Will see if I can get pictures. This was an option. Switch mounts in the little hole on the side of the trunk rim.
  18. 69conv

    Is your job boring?

    There will be so much crap coming out in the next 10 years. If you were injured you may be entitled to compensation...
  19. Kern Dog

    Is your job boring?

    I saw it all as a means of using fear to control people. Screw that.
  20. Kern Dog

    Frontend ride height, limitations

    Im not a fan of the dropped spindles. The reports of difficulty getting a proper alignment with them are enough to turn me off to them. 1.03 torsion bars are fine. If the car feels like it has no suspension, it is because there is no UPward travel left in the lower control arm and it is hitting...
Back
Top