Search results for query: what oil

What I remember about the episode was a conclusion that oil flow is more critical than oil capacity.

Hello, Just getting finished up on 383 break-in on 67 Dart. Did two 2000-2500 rpm pulls bringing water temp up to 150 then cool. Thing is probably only have about 15 min runtime so far.This time drained water and oil while hot. Surprised at what the oil looks like already. Questions are: How...

The oil filter that came off was a carquest R85085 and is about 3 1/4” tall. No idea what engine it’s supposed to fit but I guess it was running on this 318 for awhile. I bought a wix 51515 and is roughly 5” tall. This filter is hitting the headers and I’m unable to spin it on. Didn’t know if...

I have a six quart oil pan on a 383 with headers and high volume oil pump. I’m changing the oil and only 3.5 quarts came out, including most of what was in the filter. I filled the new filter part way before installing (1/3 quart), then put five quarts of oil into the engine. I ran it a few...

It only smoked when I started hearing the noise and gave it the beans, out of frustration. No smoke any other time. I thought i posted the numbers. Will look them up and edit this and the original post. I have no vacuum advance. I'll check my data log for timing at that RPM. With all the...

True - I used the wrong word. I should have said there is no supply of oil to the bearing from the oil pump, so what oil is there has no pressure behind it and little ability to keep the two from touching.

...This is on a OEM brand repo gauge, I will hook up a mechanical gauge to see what it says. I was talking about it with a friend and he asked what oil I’m using. I said 10 W30. He suggested going to 20W50. Now here’s my thinking. 20W50 should give a higher pressure reading because it’s a...

The issue is more than likely the speedo head causing your issue. They get dried out from lack of lubrication. My 65 Sport Fury developed the same issue. I pulled out the speedo cluster and put a drop or two of clock oil in it. It has been working fine since then. This is what I used...

As the title says, I have a new Mopar crate engine which is a 2019 manufacture 5.7 crate engine. I got it new and installed it about a year ago into my 71 Charger. I finally went to fire it and no oil pressure. The engine ran for about seconds and died, I did this twice so about 30 seconds all...

Some do some dont.. my last 2 318s i tookj apart didn't.. BUT.. what i did was if you look where the plate goes the oil line ends at it with a pipe plug.. i drilled bout a 3/8" hole in the thrust plate and a .060 hole in the pipe plug (hole int he trust plate is so oil can shoot out) so i made...

Yea, you’re right. I understood what you were saying. Appreciate the advice and feedback!

What is the piston to cylinder wall clearance? This is the biggest factor in what weight oil to use. What is the bearing clearance?

What about clearing the oil pan when the jack is totally collapsed?

My experience with the stuck bypass valve was the result of a very small metal shaving getting wedged between the pump body and the valve……. Resulting in it being stuck in the fully closed position. This was a 340 with a Melling M72HV pump. The result of that was a hot idle oil pressure of about...

How many miles is that? What is the cam? Springs/pressures? Rocker ratio? Oil and weight? Oil change frequency? If you take queues from the factory…….. Milder cam profiles, combined with less spring and lower rocker ratios……. should be more reliable than the opposite. The same holds true for...

IMO......# 1 or # 2 rod bearing. What is the oil pressure at idle?......... BOB RENTON

HI, about 10-15 psi at hot idle.

Well, that was quick. Yes 833 oil change also while I was under there. I put Synchromesh in this time. What a difference. I've always had a little 1-2 clash when cold after rebuilding it years ago. I even put an entire new synchro (newer design) in when I rebuilt it. Haven't road tested it yet...

DLC is used on many items. But...going to be watching/listening for feedback. In the meantime, use the best lubricant you can get. The wagon will be getting Amsoil when I get the new bullet together. Right now since it has an appetite, $5 qt oil is what I feed it, VR1, as opposed to $12 qt Amsoil.

I've run the drill/tool CCW for about two minutes and don't feel any resistance. How long does it take to feel that. Checked the oil level and that has not gone down either. Just want to get an idea what to expect.