Search results for query: *

Thank you. I'll figure something out.

These starters that came out 15 years after the last big block was built, ( and therefore not designed for the BB) often do not fit in the curved pocket of the block. Clearancing required. They have to bolt absolutely flat to the trans, with no interference from the block. It's not hard to make...

Yes, I pulled it out and tested it. It works just fine. Thing is, the starter went in fine. I did notice a small gap on the stud side, of the starter. Your talking maybe less than an 1/16 of an inch.

Very cool! The girl gots skillz!

Munster's Koach, yes. But Lilly or Marilyn?

I have a hidden headlight grill and a front bumper to blast and paint to match the rear bumper.

Well... alrighty then (he says in his Jim Carrey voice). 1st pic is of the old clip. I guess it's raised / convex as it is to provide a slight spring(ish) pressure between the cable end and the firewall grommet. Well... now it just slips out. I just got the darn thing a couple months ago...

I hang it on the upper stud then put the bolt in finger tight. Last the nut on the top ( it's a fine thread).

Well i really need the LH drivers side. If you could check i would appreciate it. If it is the passenger side I might still buy it to have a spare. Apparently these are getting harder to find, for me anyways. Thank you.

That’s for sure. Kim

I'm going to try and see how two studs would work out. With these shorter starters it should slide in no problem. And I can see why you would have the stud on top, its a pain in the *** to line up that bolt.

That's a whole different PIA.

I just went out and looked at mine. I'm not as optimistic as I was. At least on mine from the inside the latch is up behind the rear window sheet metal. I laid out some painters tape and took pictures of where they are located. Let me know if you need anything else. I'm hoping to get it in...

I hope this change meets with Marks approval.

P.m sent

I bought one from Rock Auto. I saw the AC Delco one, but it was only a one year warranty. So for another 10 bucks or so, I bought one with a lifetime warranty. I hope I don't have any problems with this one.

Dash frame and steering wheel painted. Going to get the dash assembled this winter. Panels are going on the car. Should be ready to go to the body shop in a few weeks. Pics to come.