Search results for query: *

I was under the impression the 10.95" kit uses 1973-76 A body parts (which says fits "fits 14" disc brake spec wheels"), and the 11.75" kit uses later B body (Cordoba) parts. I would send an email to Dr Diff to be sure though.

Good time to flush it out as well.:thumbsup:

Cars in storage or winter. Hi pressure hose assy. next and in waiting, first project next spring..

I did wilwood, the pads are readily available. Plus Dr Diff doesn’t have anything that fits my car.

Those are hard to get, at least the old school full coverage non garbage type.

My transmission is a 67 model. My gear has a 33 tooth count. Brewers and Passon don’t seem to have any new or used 1st gears in stock.

Good Thursday Brethren. :drinks:

To the contrary- my 70 9.5:1 383 Bee had a Torker II with a modified Holley 650, Super Comp headers, stock 727 (except for green waffle clutches) and 3.55 SG. Not a dog at all at any RPM.

I got the RCDs for the rear and kept KYB excels for up front. The RCDs will work for the front but you need to modify the LCAs to make them fit. Being as there are no replacement LCAs for 73/74 and used ones are hard to come by, I don’t want to take the chance of messing them up. The KYB...

Thanks. Original 1952 hardwood. Downstairs apartment had it too, until a tenant completely destroyed it. Now downstairs has LVP...

For a minute there, I thought it was the Brady's driveway.

That floor is too nice to rent out to other people.

We ordered some for a paint card. I’ll let you know.

So I've been searching the forum for front disc brake conversions for my 65 Belvedere wagon. One that I see come up a lot is the Dr Diff kit. Is this using factory parts like pads, rotors, calipers etc. I want to be able to replace parts as they wear out in the future and get them from local...

Got the same partners that brought me to the dance. For Pomona, TF Kalitta FC Prock PS Anderson PSM Herrera Good luck everybody!!!!!

Welcome to FBBO from Georgia. Let's see some pictures of your '74 Challenger. We are incurable picture people here. :)

How do you clean your bolts before you use The Casewell process?