Search results for query: oil

Yes.

The oil pan bolt holes are open. Weird

There is no other oil hole !! What is your expectation ??

...would you expect to find some gas in the engine oil? Or is that a problem that needs to be addressed?

stock oiling thru cam bearings no fulltime oilng, holes in bearing mathes holes in the block. TF240 heads. When i hade the shaft off and primed the engine it shot oil thru the oiling hole in the head to the front fender of the car, so there is oil coming. Oil is a 20W-50. But when i burned the...

That's completely ridiculous!

Amsoil Signature 10/30. Coupled with EFI, zero oil consumption. 20+ years.

Mopar Performance Oil fill cap. New never installed. 20.00

You would think somebody noticed that one has an oil hole in the leg...other one does not.

AI description. AI Overview A Mopar 383 oil pump system typically uses a pressure regulator valve, often called a pressure relief valve, which is located within the oil pump itself to control and release excess oil pressure. While oil filters have their own bypass valves for when the filter is...

0G189266 is the vin number on the passenger side near oil pan rail as all others.

Section 21 1:9 Oil system

I've seen many a 440 oil pan (mostly on C bodies) that look like that, having been driven with the dent for years without apparent issue. The oil pickup is a good 1/2-inch from the bottom of the oil pan, so it takes a significant dent (more than 1/4-inch depression) before I would begin to...

How bout guys that don't know how to check or add oil?? Oil check and oil adding 1965 barracuda

...my brother's, who was corporate pilot for PPG (he flew Gulfstream#1 and Gulfstream #2) was a stickler for air craft maintenance, NEVER CHANGED OIL IN HIS CAR. His philosophy was oil never wears out, it just gets dirty. His fix was to change the oil filter in the car, a 401 Buick engine...

Regardless the capacity or style of oil pan, the dipstick measures how close one can come to the rotating crankshaft, or the upper level of the oil. Presuming the dipstick tube is correct for the 440, any 440 dipstick should function in this capacity. The casting number of the 1973-78 400ci is...

...with the Qa1 K member with rack and pinion. Hopefully in the coming months, I'll be test fitting my 6.4 hemi, and I'm wondering if the 45 degree oil filter adapter is necessary with the Qa1. I'm also seeing on the 68-70 b body that the wiper motor bulge might need to be clearanced a little...

They will 'go' 200k with regular oil changes lol

But look at the money he saved in oil changes!!

No oil out of the vent this am. Not sure if I will get a test run in yet this fall. Will keep informed.