Search results for query: oil

Aluminum oil pan and decent shape

A little peek under the valve cover, diagnosing/assessing a low oil pressure issue

Transdapt oil filter relocation kit @davek

Reminds me of a '62 Rambler I once had, try to remove this filter without douching the whole engine.

sucking oil from a intake port area??

This question is pertaining to my last about distance from the oil pan floor, so if the oil pump pick up is too close to the oil pan sump floor, can it suck it up to a certain degree? I ask this because both my old pick up and new one supplied with the deep sump 7 quart pan are hanging a 1/2...

...looking in the forums for more info and apologize if a thread already exists on this, but have been stumped. The 340 in my car has 60+lbs of oil pressure on cold start and maintains about 35-50lbs on the highway, but low rpm and idle after warm it drops below 20lbs. No knocks or visible signs...

Great rags to riches story. Lucas products work; most others are just snake oil. Forrest Lucas, the unlikely self-made multimillionaire and namesake of Colts stadium, dies

Put some oil in it, ran the oil pump to get primed and then installed the Intake Manifold.

Yes, and like mentioned previously, spray with a type of oil inside and then in the lock outside.

The old cars were easy to work on, but you did have to work on them more often. All the changes to fuel and oil have made owning an old car more difficult unless you either upgrade parts, like exhaust valve seats and maybe roller cams, or use high ZDDP oil and leaded fuel, or additives to the...

The LA series had a great placement for the oil filter as long as the exhaust wasn't modified to block it. The B/RB has easy access too. My 2002 Dodge 1500 had a 4.7 with the oil filter in the same spot as the big block though they included a drain trough under it. Quite smart and helpful. The...

My oil fill is 1200 feet from the road. They have already been told that they either back in... or back out. Do a three point turn this Fall and you're buying me new stuff..

Thanks Don. Looking at the last picture I just realized I can see the flywheel. Totally separate question but Is that normal? I feel like I shouldn’t be able to see that. I somehow hadn’t noticed that before while being under the car

Mopar Performance oil slinger. New never installed. $20.00 P5249636 Sold

Do you want a pick-up tube with it? I do have an unmarked oil pan, I'll get you some pictures. PM if interested.

I've had similar issue and it was oil entering through intake valve guides on 2 cylinders. Seals were teflon and I reckon oil was wicking through the micro scratches on valve stem. Intake valves were always saturated in oil when parked up. I bet your car smokes when it is started first time in a...

Look at the partial VIN stamp on the block right above the oil pan lip.

I bet spraying the front with wd40 or maybe baby oil (or similar) before driving would be a good preventative

This is a Used OEM Big Block Oil Pump #2203260. It is original not a china knockoff. It is in good condition, but could use a clean up. It has the red pressure spring. The four original attaching bolts are not shown in the pictures, but are included. $35.00. Local pickup, or buyer pays shipping.