• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Search results for query: *

  • Order by date
  1. f569

    Put it Back Like it Was

    Sideways or not, that pic makes me thirsty .... every time!
  2. Richard Cranium

    How's your view ?

  3. f569

    Put it Back Like it Was

    I can't do it if using the phone but if using the PC I open the photo, left click copy then left click paste in this reply area. Have been able to add 3 pics successfully this way. Haven't tried more than that.
  4. RT SE 440

    pinion angle

    Hey guys need some advise on pinion angles I'm wondering if anyone has done this before and would know what degree pinion wedge to use .I've put a set of front leaf spring hangers with the 2 holes to lower the front of the leaf spring it's come down about an inch & a half from standard height...
  5. Hemirunner

    I'm getting close to switching to a roller cam in the big block!

    You’ve really answered your own question. Lobe taper on a flat tappet cam will be ground so that it keeps the cam pulled rearward, into the block and the front sprocket rides against the block with a film of oil in between. Lobe taper can also be ground to push in opposing directions to...
  6. 3sloppydogs

    Happy Birthday Aron Gleason

    Happy birthday Mr Gleason
  7. 3sloppydogs

    Why are there so many members on this early!?

    The dogs usually wake me between 3 and 5 because there are killer deer or coyotes near and they know it. That's life with LGDs I really don't mind. They are doing their job protecting us.
  8. turbine68rt

    Happy Birthday Aron Gleason

    :drinks: :bday::bday::drinks::bday::drinks:
  9. Richard Cranium

    Looking for car cover suggestions

    It works as good as jogging 5 miles in 90 degree heat, then standing in front of a fan to dry off instead of taking a shower.
  10. chargervert

    Steve Dulcich Road Runner Road Test...

    It is important to leave more room between your classic car and another vehicle when driving them. The old cars will not stop like your modern daily driver does!
  11. F

    FOR SALE TTI Headers 440 - 218

    Hmm, that’s why I save all of my header boxes. That’s all you need plus $100 shipping and everyone is happy. Just shipped set to CA from TX.
  12. Dean Prevolos

    Bought a new M&H under dash wiring harness for my 67 Charger- Installation tips?

    Before i start my installation of the under dash wire harness I thought I would ask the Forum members for any tips. Questions I have are: 1. Can I install the harness without removing the windshield? I know the windshield has to be removed to remove the dash but is that necessary to install the...
  13. Kern Dog

    I'm getting close to switching to a roller cam in the big block!

    I'd agree with that if the flat tappet cam setups also had to be limited the same way. Lobe taper....I understand that it pushes the cam forward or rearward, I don't recall which direction. I don't quite understand if it does push it rearward in a small or big block because that would put the...
  14. Don selleck

    Why are there so many members on this early!?

    woke up at three, trying to be quiet for the wife. Got 5 hours not bad, almost 5am now gonna head out to the shop in a minute, have to warm up a bit I keep it at 55, a bump to 60, helps alot and will keep it reasonable in there for several hours.
Back
Top