Search results for query: *

check-mate :drinks:

Nothing like a comfy pillow...

I ran one many years ago with a 4 speed. It didn't bog but it wasn't fast either. Running on just the center carb with the outers disconnected was much faster up tp about 3700 rpm. Doug

Oh wow.....sorry for your loss. Condolences and prayer goes goes out to the family and friends. And yes, holiday tragedies doesn't make things any easier....

I couldn’t get me console as close as you have it. It wine line up with the linkage for the transmission.

I will note that from 1990 to 2019 I had used every cleaner known to man on my Superbirds original Black top. Would look good for a bit and go right back to looking Gray. Prior to the Aero Reunion in October of 2019 I used Scrubbing Bubbles... it stayed BLACK. It is still Black even after the...

Yeah, aware of that. Just sort of surprised that it was not especially since the radio choice was.

Epoxy on passenger door and repaired area of roof.

That’s devastating to hear and I’m sorry for the loss of your friend. And his family, especially with the holidays coming up? Lord help them through it… R.I.P. Matthew Cunnington

The “triple pumper” 6-pack setup has side hung float bowls (not “V” bowls) and fuel enters on driver’s side instead of passenger side. Trans-Adapt (?) or some other aftermarket company sold the linkage (I used to have one). I never ran the triple-pumper, but I’m sure there’s no bog, but gas...

I am installing an automatic console in my 4 speed coronet. I purchased the standard top plate ,mounting brackets and 4 speed bulge plate for the shifter hump. I have a couple of questions. First,in the bulge side I purchased,theres a one inch hole that doesn't seem to match up with anything so...

im open to listen to any realistic # based on condition . looking for a unrestored or finished car . i appreciate yourei help

So, there are two commercials on T.V. from Comcast that blow me away with their creativeness! Mind you, I HATE Comcast, but these commercials are great! Frankenstein in the Castle asking "Anything about the Bangs? and the Rabbit commercial with the 1950's band with Louis Jordan, And the green...

Yep, aftermarket covers is the issue. I have done it both ways. 1) notch the tray. 2) on this car I moved the battery to the trunk.

With your gasket dimensions for the Cometic HG, entering the other piston dimensions of 4.300" ring area diameter, the top land dimension of 0.250", and a guess at the chamfer of 0.031" @60 degrees because it would seem that "Maff" is hard for some. It is too difficult to see that a chamfer is...

When I put a new intake on an engine, I usually bolt it to one head only with no gaskets. I also take a cheap electric endoscope and match up the ports. Then I use feeler gauges to measure the gap between the intake and the head. You also check the taper in the space if there is any. If it's...

I have done several of the hiding a smaller battery within my repro battery cases and also convert a standard store bought battery with the Weskar cap and decal kits. The last 3 photos are of the same battery.

Halloween this year…