Search results for query: *

Don't zero deck your block. There's so many other things that get affected besides your intake manifold. FYI if you go ahead and do zero deck your block is that your pushrods are now too long. Now you have to drop a cool $2k getting special ones made. Now if they take down the rimmed edges, i.e...

Her dearly departed Aunt Jennifer's car. Now 38 or so years old..

Funsies mock up. **** is hot.

So front frame rails needed a little work. One side looks decent where the body mounts are the other side body mounts not so much. That got cut out and replaced.

Ordered paint samples today

agreed

Just paid $81.15 /pint for a sample. Got 2 samples $162.30. House of Kolor Kandy.

Yes, but may not be much coverage

Curious where others have the harness passing through the firewall with a terminator X (or any other ecu) in a 68-70 b body. My car has the factor heater box, 4 speed and the engine/dash/heater box is already installed so access is a bit tight for drilling holes. The hole for the ramcharger...

I’ve checked several stealths for chamber volume…….and 82-83 is what I often see after cutting the seats. If there are no shims under the cups, and the mic is correct, that’s pretty far from spec imo, and I’d address it……somehow.

In early 2020, I called what I thought was Racer Brown to spec a cam for a 383. I told the guy on the phone that I was worried about the risk of cam failures. The man said that he never heard of a cam or lifters going bad. He lost all credibility from there. This same line is spoken by others...

Murderer's Row, 2nd Matt Helm movie starring Dean Martin and Carl Malden.

Yep, toooo damn early for Winternet !

Thanks for the advice. I did not provide the shop any different retainers or locks so presumably they were reassembled using the same ones delivered by 440 Source - they certainly look what came on them. I wish I had taken baseline measurements before any work was performed so I'd know how...

The dual springs.

Ok then I will definitely order with springs then thank you

Sorry for the loss of your friend. Way too young and it’s always tougher when they have not had a chance to really live… Take care.

Old Air Products comes to mind.