Search results for query: *

Just be aware that there is no “industry standard” for retainer installed heights. So, the Hughes +.100” retainers may or may not actually be +.100” compared to the Stealth retainers.

Some people prefer the convenience of buying a packaged kit that includes all the stuff to complete a swap. I understand, that is easier and usually works just fine. I have a history of trying to make use of what I have or what is immediately available AND a curious mind as well. Junkyard stuff...

KD,, I think yes, unless shimming is an acceptable ways to get there as well. I went to a supposedly reputable machine shop after searching for a couple of months and I got less than stellar results. Not excited about having to go that route but will see what the experts say. There is the...

It’s called “production tolerances”. There are a lot of machining operations involved along with numerous pieces in play. This is why you check. There is no problem stacking shims to get the height closer to the desired spec. Rick, it’s more spring than I’d use if I were building it, but in...

@HawkRod used a front kit and modified it for the rear seat in his RR.

Remove the cable, hang it, start lubing with a penetrating spray. I've had good luck with this. Let it hang for some time, spin the cable with a drill. Repeat as needed. When it's freed up enough, use a good quality lubricant that will adhere in the casing. Original cables are the best, unless...

Wouldn't that mean that you'd need to pull the heads apart to have the seats cut deeper?

I am always looking for good deals, but during this time of year, I try to avoid over spending and keep it to a very low amount. Needs and wants are my goals as I prefer to spend on my needs rather than what I want, I want, I want stuff...cr8crshr/Bill :usflag: :usflag: :usflag:

:lol:

Cool beans!

let me know

I've always been a fan of Ponchos...Every one of them:thumbsup::thumbsup::thumbsup:...cr8crshr/Bill:usflag::usflag::usflag:

If you want to donate a hemi , I run a no kill shelter for gently used unwanted hemis , just send one over and I will do my best to give it a proper home :poke:

Here's a novel idea...Just don't speed and obey the speed limits where they are posted. Problem solved and no out-of-pocket cost at all...Just sayin' is all...cr8crshr/Bill:usflag::usflag::usflag:

Frankly, the 2001: A Space Odyssey timeline is not the worst we could have done. Elon, we've got a new build for you -

I don't either. I checked them multiple times, made sure the cups and recesses in the heads were clean, disassembled and reassembled the retainers and locks yet the measurements repeated within .001. I expected them all to be at 1.875 plus a few thou to account for the valve job. The only...

Firing Frieburger and Dulcich is what ruined motor trend TV. I've got 60 or so Engine master shows on dvr, NOTHING since the firing. I think I might have spent a half hour on MTTV once, about two weeks ago.

New cables are garbage, lube original one. Speedo can cause the same sound, from personal experience. Pull it, WD40 the heck out of the mechanism, specifically the sealed up pot metal part, which should have a small hole or port to put WD40. Use the end of an old cable or something that fits...

My God, they looks so good, it looks almost fake!! I'm seriously jealous!!

Be careful of octane boosters. When they say "increases x amount of points", some mean point points. Say it says five points. It doesn't mean a 91 goes to 96. It means it goes to 91.5