Search results for query: *

$50

I'd put the sales for this in PMs. There are probably bots working for Warner Bros. lawyers looking for unlicensed copies and sales.

Factory service manual is an invaluable resource for this project.

And I took the valve body completely apart, cleaned in mineral spirits, and reassembled. Nothing major inside, some areas on the plate where check balls were slamming around. I did order a rebuild kit with new steels and clutches.

Ok, in no particular order: Not enough pictures and the ones he posted aren't good. The chrome on the front bumper looks old and tired. The air cleaner looks rusty and crusty. The front of the engine and intake manifold haven't seen a good coat of paint in a long time. Plastic body fuel...

An end to the story. I was able to get a new title from DMV. The VIN had been purged from the system due to the car not having been registered for decades. I submitted paperwork to get the title 'rebuilt'. I got the title in the mail last week. The buyer is fortunate in the extreme. That...

Not mine, never seen it in person.... 1969 Dodge Coronet 500 convertible for sale by owner - San Francisco, CA - craigslist

Took the overdrive apart, removed the bearing and the output shadt bushing. I used a cam bearing installed tool to pop the old one out.

.

.

welcome to FBBO good find nice looking super bee

That valley pan was the same Fel-Pro ms 96000 that you already have. It would only be unfortunate if it was physically thicker than the new ones.

Looks like you may have had a few too many! :rofl:

Easy question: You do have the clip on grounding strap that attaches to sending unit nipple and fuel line installed, correct? If not, you get no signal.

Lol thank you, not sure why I can't get the pictures right

Not sure how I came up with this.

If you have the piece? I use epoxy with a metal patch behind it and clamp it for the reinforcement. Rough up the metal real good to get good adhesion. The metal I make go past the joint as far as I can to spread out the load. I repair a-lot of plastic trims that break the same way, only with...

None of the Chinesium replacements last. Buy NOS, or prepare to replace it twice a year. @Slantsixdan had excellent replacements made by a Chrysler supplier, but I believe he's sold out on stock.

nice road runner project keep us posted