Search results for query: *

https://a.co/d/6wOxZx4 These should be good no?

For the record, unexpectedly my black car won the B-body Super Street Modified award. I was surprised to say the least when the name and car were summoned to the stage. I was content enough just to be flanked by a sea of A990's.

My Sister had an Arrow, '83/86 and I always wanted to do that to it! LOL

He appears!

The orbital was your pitfall. As I noted earlier I would have done the sanding FIRST and wiped the top clean with lacquer thinner... but in this order the sanding should have been done with the paper wrapped around a piece of 2 x 2 wood and straight back and forth the length of the cover.

1970 Rally Dash Radio Inlays New. Was a kit but only have the radio pieces. $25

:bday: :bday: :bday: :bday:

Prep work - Blasted with aluminum oxide then blown off and wiped down with acetone. Painting - Etching primer applied, 1 coat. Allowed to dry then the color was sprayed in lite coats, maybe 30 min between coats. Last coat was wet to the (my) eye. Sanding was done with 6" IR orbital sander...

Both #9 and #10 work. It just takes practice, trial and error. Block sanding is good, go fine, and with water for lubricant.

1973-up Caliper Cores. They maybe fine as is but recommend going through. Unsure what they came off of exactly. Wasn’t getting much luck looking up the casting numbers. Can separate. $40 ea or $70 pair

The amount of work some of you are doing to your cars is crazy impressive!!! Much respect

I pulled this out of my 66 Satellite with Hemi due to a front leak. So not correct for the engine. I suspect the leak was from the retainer bolts which were not sealed, but I have polished the input and put a new seal in it and sealed the retainer bolts. I replaced the rear seal and bushing a...

Ok thanks! I had heard it won " best detailed" or something like that, I'll have to ask the body guys. They do some extremely high end work.

1968-72 “Plymouth” Emblem. For hood or decklid $45

I recently picked up a 408 stocker. After removing it from the create I started a thorough inspection of the engine. Using my bore scope I noticed piston skirt scratches on some of the cylinder walls. None of them look deeper than the cross hatching pattern. I called manufacturer and they told...

Come on over! I can always share!

Like so...

Probably the bottom. Be advised, years, 4-door, and 2-door seats can all be different. Had the same issue with the front bench in my Dart. After finding a donor bottom bench from a different year and a 4-door, yeah, the springs were different. I modified them to work. Spaced the 2 of...