Search results for query: *

Not aftermarket pumps. You may find a generic in- tank pump thats good but wouldn't trust any holley, carter, or whoever for long term reliability. I chased in my mind what your trying to do and of all the senarios i came up with the answer was always no.

I bought a carpet kit for my 62 Imperial.

Yup.

Thanks for that picture. It says the 17154 is a column/console valve body

Been hearing some about this problem with others....what brand are the tubes?

I like to smoke the tires leaving car shows I take it to the drag strip every now and then. She’s not just a cruiser. Pic is just some of the marks before I had to put her up for the winter

I will do that, thanks

Mine are on a 8.5 centerline. If you can find a 10" with the right backspace, a 10 would be preferred. The stock eliminator guys are running 9x30s on a ten inch rim.

I contacted Turbo action and spoke to the owner and he surprised that I even have it. He said he only made about 10 of those back then. It is for a push button trans. The guy I bought it off of said the trans worked and shifted fine and the only reason why he was getting rid of it is because he...

I used to walk by a '69 Mod Top Barracuda. Pale yellow. I didn't love it though. I assumed it was some lady's car. Later in High School I loved a friend's '70 Super Bee. It was bronze with a white top. Pistol grip 4-speed. Skyjackers with big wide meats on the rear. He was the son of our local...

I thought electric pumps were made for continuous duty. They aren't pressure switched, just regulated whether with bypass with cooling or dead headed which slow stalls the pump causing heat.

...the senior staff was called in to entertain some Congressmen and staffers on an "inspection tour of Korea". BS! Shopping at our expense. On of the t**t staffers said they had appropriated $5m for our jackets, as if the were a gift. I got mine later. Ironically, you cannot wear it in a combat...

My mistake, what I meant was MY car would be quicker on a 315. I doubt a 315 will fit his car.

We don't have an "emmissions" forum category so I place my question here. I am using the old school Direct Connection chrome valve covers on the 340 build and the 1/2" PCV is loose in the rubber grommet hole. Looks like the hole is about 5/8". Anyone have a part number or source for a PCV that...

I've used leverage from a long metal pole stuck in the end of the header to bend it out and gain a little clearance.

NOS Thermo-Quad carburetor kit:

What I'd do is JB Weld a thin piece of aluminum or steel on the inside to cover the cracked section, which will make it much stronger than just epoxy alone. I used a similar technique to repair a broken plastic mounting screw post on my glovebox door: Grendel lives...resurrection of a 1970...

Doubtful. A flipper isn't going to look at the finer details.

'68 Barracuda Fastback.