Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Agreed...wife and I watched that every week when it was on TV. Great series. :thumbsup:
The other one with excellent scripting is "The Blacklist" with James Spader. :)
Luckily they have very few of them around here, and I avoid them. I mostly run into them on road trips out of state and have found
"mute" on some, but not all. It's still incredibly annoying!
@torredcuda Thanks for the firewall labeling picture. Pretty sure the ram-charger vacuum lines enter above the heater hoses. See attached unrestored 70 RR.
D
The weatherstripping isn’t too tough. COUNT THE HOLES VERY CAREFULLY. The clips break if you try to reposition the seal. I started on the bottom of the door and worked around each direction inserting 1 clip at a time. I ended up “slightly stretching” the seal on either end (maybe 1/2”) so all...
66 70 Bbody floor shifter with the rods and bracket. In good used condition. The chrome on the shifter is not pitted. The rubber boot is in good used condition also. Comes with 2 rods and bracket. 70.00 + Shipping
Have a nice shifter knob, button and the spring. Chrome is in very good condition...
That is an auto console harness. You can probably still make it work but you only need to be concerned about the yellow and pink wires for the courtesy lights. If you take a look at the three pages on megaparts in the link below you will find the two correct harnesses for 4 speeds. One for the...
I've had better luck with Hoosier. (as well as lighter on pocket book) Than either Goodyear or M/Ts. I believe Goodyear is probably the best performer, but didn't last as long.
JMO
Nothing, except the springs. One thing I did do, was put air-shocks on individual lines to preload as it worked best. Never more than 25lbs on either side.