Separate names with a comma.
Had some 15x8 1/2 with a 3 1/2 BS on my 68 runner. They rubbed the outer lip on turns and bumps. Went with 15x8 4in BS with 275-60 Coops all good now.
I have the same cam, it has been noisy after about 1500 miles. Same deal on the FP pushrod also. I tried some isky ductile rockers and Smith Bros...
You are welcome anytime Steve.
Lived in Fernley NV and this is the time of year for wind and those pesky Dirt Devils. Live in S New Mexico now and there are warning signs about...
If I had to do an over-drive again it wound be a Gear Vendors. A TKO 600 can take a beating BUT the 2-3 shift is LACKING.
I have used one of them Propane tall cherry heaters in Oregon in a 25x25. Now in NM and use the same one in a 1000 ft shop with 20 ft ceilings. As...
Soak in Kerosene works to. Worked on My 68 cables.
Hey Rick it is in the mail.
How can I miss you when you wont go away. Dan Hicks and his Hot Licks.
I sure miss Archie Bunker.
PM Me your address and I will send one FREE. Merry Christmas.
Got a shaft to try for SNG ?
I have had it and would try again. WTF is umami , have had Unami in a Sushi place = Sea Urchin guts. Not for the Faint of Heart either one.
Good deal hope it has all the studs.
Comp CRB XE282S-10 Got it in a 470 with TF 240s. Runs like a Lady around town and a Whore when you put your foot in Her Ass. Might be a bit large...
Isky or Crane Anti pump ups. The Comp Hi-Energy are a crap shoot. I have a Comp XE268 kit in my 440 and have been noisy cold from day 1. My 470...
AMEN I think your projected power levels warrant the after market block. 650 plus a 250 shot you will be praying with a stock block.
Sounds just like my 440 with Hyper KB pistons when cold. Thought it was in the valve train with Comp Cams XE 268 and their lifters. I switched...