Separate names with a comma.
I have a standard bore 383 long block with 2 sets of heads. Was running when pulled from car last June. Eastern PA.
I don't have a body, but have a spare 383 with '69 date if interested.
Google "Steering box adjustment". You can tighten the preload on the worm gear and it will help. I've done it on manual boxes. There's a lock nut...
Easy test: Check all the fuses too. I had a '65 Plymouth that the interior lights would light up when I braked. Bad fuse.
That worked! Glove box now stays shut.
Yes just need one. I want to replace the one I have that one of the ears was welded and does not seal properly.
Only need one, however if the price is right for both...
Need 1 MP Valve cover for BB. At least good condition. Eastern PA.
I need a MP valve cover, in good condition for a 383. Cast Aluminum, black and without cracks or broken ears. I'm in Lehigh Valley, PA.
I ended up taking a flat file and increasing the angle of the "foot" or "tab" a wee bit so that the spring loaded bar nestles at the base of the...
[ATTACH] [ATTACH] [ATTACH]
It's a little blurry, but the date is April 24, 1968.
Pickup or may deliver within 75 mile radius of Bethlehem, PA, otherwise you pay for the ride.
Price: $500 or best offer.
Standard bore 383 with...
Set from a "68 Chrysler. minor pitting on top. No rust inside. $80 OBO.[ATTACH]
Used 16:1 muscle maker. $200 OBO.[ATTACH]
One RB distributor $75
One B Distributor $70
I have a 383, standard bore with 1 set 906 heads and a second set of bare 906 heads, milled .015". Block has water pump, damper, oil pump. Block...
383 Short Block. Standard bore with cam, hydraulic lifters and push-rods casting #2468130-7 LL out of a ’69 Roadrunner. Needs rebuild $500...
Hold on. Never mind. Sorry for the confusion.
I'll buy it.