• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Search results for query: *

  • Users: mac
  • Order by date
  1. mac

    Urgent help needed.

    get in contact with this person and see if he can help you with what you need. Joe’s Mopar Distributor Restoration | Facebook
  2. mac

    Non A/C Heater Box Squirrel Cage Removal

    remove set screw. spray your favorite penetrating lube. grab the end of motor shaft with a good pair of vice grips. holding the vice grips, grab around the outside edge of fan and gently start to try and twist it back and forth and pushing towards the motor. it should start to move and once...
  3. mac

    Measurement for a12 hood

    this is what i have.
  4. mac

    throttle shaft bushings

    the caps on the idle mixture screws are already removed. what are the nylon bushings you mentioned?
  5. mac

    throttle shaft bushings

    anyone have a source for a bushing kit for the 2300 series carbs? have what i consider to be too much movement on the throttle shaft. trying to fix idle problems.
  6. mac

    TUNING A SIX PACK

    the carbs i had were pretty rough and just about anything would be an improvement. also, like i mentioned before, i did not have a good experience with the Promax replacement.
  7. mac

    TUNING A SIX PACK

    i have to ask, what small screw are you talking about? is this on the end carb or center carb base plate?
  8. mac

    TUNING A SIX PACK

    i did not. that piece is in the spare parts tote. bought 2 new base plates complete from Holley. i tried to get it squared away to enjoy the ease of adjusting rear carb. in the end, for me, it worked better to figure away to adjust a stock base plate, hence the making of the tool.
  9. mac

    TUNING A SIX PACK

    i had the Promax base plate but the machining was not accurate and had trouble getting the butterflies to completely close and one of the metering screws would not allow me to accurately adjust. as for the ooh's and aah's, i like it but i am in a mopar deficient area and they just don't get it.
  10. mac

    TUNING A SIX PACK

    tried to figure a way to be able to adjust the rear carb idle. expensive carb adjusting tools don't provide a good angle to reach screws. came up with this and worked well. purchased a spring that is used to clean commercial coffee makers and a short piece of 5/16 brake line. put a bead of...
  11. mac

    Radio shuts off when turning

    not my intention to take any credit for the info i posted. just found it very useful at the time i was experiencing the problem i was having with my car.
  12. mac

    Radio shuts off when turning

    i found this post somewhere and it explained the exact problem i was experiencing. might be your situation. i also changed voltage reg but ended up changing alternator to solve problem. see if your parts store can test your alternator. "It is possible that you have an open diode in the 3...
  13. mac

    Mirrors are not very tight.

    with my road runner, i gently used a heat gun to soften the glue holding the glass. once the glass is removed, i was then able to tighten the spring clip that holds tension on the pivot. resoften the glue with heat gun and install. be great for over 15 years.
  14. mac

    Six Pack Carburetor Binding?

    https://www.forbbodiesonly.com/moparforum/threads/gaskets.99239/#post-910322727 go to the last post on this thread.
  15. mac

    Harland Sharp adjuster size

    want to purchase a tool like this - https://www.summitracing.com/parts/pro-66779 for adjusting and would like to know what size the allen in the adjuster and size of lock nut on Harland Sharp rockers https://www.manciniracing.com/brb16ratwits.html . car is in storage or i would go and look...
  16. mac

    B Body Heater box interchange.

    it is not just the bracket. you have to look at the arm and which direction it goes in relation to the box. the 1966 and 1967 arm goes towards the middle of the box and everything later 91968-1970), the arm extends out over the front cover of the box. one on the left is 1968-1970 one on the...
  17. mac

    B Body Heater box interchange.

    there is also a small difference how the box is molded by the defroster tubes but that won't cause any issues. the 2 from the left which are 1966 and 1967, you see a difference in the box from the other 3 which are 1968, 1969 and the far right 1970.
  18. mac

    B Body Heater box interchange.

    here is one for 1966
  19. mac

    B Body Heater box interchange.

    this is a view of the blend door bracket for a 1968-1969 (1970 is the same as this but with a different heater core) here is one for 1967 this way you can see the difference on the orientation of the rod in relation to the cable bracket. you will have the push pull action but the result will...
Back
Top