Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
There could be an unused wire and empty socket under the dash. My 1967 Coronet shop manual wiring diagram shows a wire near the radio, and traces back to the same power pin that works the other instrument lights. It is only powered when the headlights/park lights are on. I also added a clock to...
I have the large unsilenced no-snorkle air cleaner on my 1967 R/T. It has black wrinkle finish with red 440 MAGNUM pie pan. I like it because it is not as often seen as the dual snorkle one. Plus, when you nail the gas pedal, it says," WHAAAAAH" ! This air cleaner is more commonly seen on Big...
That baby is a little tough underneath. Buy them both and make R/T clone. Dana 60 and 18 spline A833 worth about $5000.00 combined. Various R/T only pieces like 150 m.p.h. speedo centre grill piece, etc., about another $1000.00. Another 440 and correct rad, plus spare set of glass, console, bell...
August, 1995 edition of Collectible Automobiles had an article on 1966-1967 Coronets. Included was a list of production numbers by year, model, and body style. As far as convertibles go: Coronet 440 = 1982, Coronet 500 = 2252, Coronet R/T = 196
These numbers are almost 30 years old, and there...
I had a '67 Coronet wagon, and adapted a Cordoba cruise control unit to the car. I would guess I mounted the servo in that area. A lot shot, but you sometimes never know what modifications your car faced over the years.
Wheel lip and lower sill moldings are specific to 1967 Coronet R/T. However they were also used on 1966 Coronet 500. 1966-'67 Chargers also used the same front wheelwell and lower sill moldings. These pieces are all stainless steel, and should buff up well. Classic Industries reproduces the...
I always change mine over to RH all the way around. I don't go to the kind of shows where people are looking that closely at my nuts. LOL
I don't want to take the chance that some goofball at a tire or alignment shop is going to twist a stud off.