Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I need help, what is the best way to remove the vent window assembly on my 2 door sedan 65 coronet! I found 2 almost new ones and do not know where to start. Also looking for a shop to set up my dana 60 rearend up. I have all the parts just need to find a good shop to do the work , I live in...
Bought these wheels when Sox & Martin when they were closing their shop in Burlington. 2 15x4 wheels and 2 15x14 wheels, the back wheels have been widened 4 inches. Brother used them on his car. They have 2 holes in them for valve stems. They have firestone stamped in them with manufacture date...
Shortened Dana 60 truck housing with Mark Williams caps. Caps have not been cut to fit. Housing is 41 1/4 wide. with axles width will be 46 1/4 wide. $350.00 will have to pick will not ship. Located in Newnan Ga
Milodon 8qt oil pan 30890 rear sump for off road trucks. I bought this pan to use on my 65 AFX Coronet with a Hemi, I wanted it to set level and not have the nosebleed stance... I had about 3 inches of ground clearance. When Milodon came out with the 31582 pro touring pan I purchased one and now...
Back in the mid 70's when Sox and Martin were closing up shop and selling things, I and Billy West went to see what they had for sale. I picked up 2 10x15 and to 4x15 Keystone wheels for cheap, I think I paid $250.00 for all 4 wheels. Needing wider rear wheels I had T-Hoff a vw shop in town and...
If you are running a 4:56 up rear and would like to go to a lower gear , I have a 4:10 thin gear set for sale . This gear set can be used with out the cost of a different carrier . I got this from Herb Mccandless when he was closing up his shop . It was used in a Super Bee that was featured many...
Have a new never used mrear207 from Mancini racing . Bought it but will not work due to passenger side water pump housing . WAs $67.95 , will take $50.00 plus $5.00 shipping my loss is your gain . Thanks John
1 3/4 x 3/4 u joint 1 3/4 x 3/4 36 spline u joint can be welded to shaft or drilled for grade 8 bolt to hold in place . Was bought for my steering shaft for my 65 afx car but went another way . $40.00 for both plus shipping
I have 4 3/8 heim joints , 2 left hand and 2 right hand threads , can be used for motor limiter or turn buckle for engine torque strap . asking $25.00 for will pay for shipping .
I have 3 65 coronet tail light bezels . 2 right hand and one left hand . 1 of the right hand side is a very good driver quality , 1 has a small bit of peppering and the left one has peppering .
Asking $40.00 for all three plus shipping .
I want to put 11x3 inch drums and shoe assembly from a 65 Monaco . My Coronet has an altered wheel base and that puts a lot of the weight on the rear wheels . My thoughts are on the back spacing on the backing plate . On one of my 10x2.5 backing plate looks not as deep as the 11x3 ones . I...
Any one know a lock smith that rekeys a door lock ? Lost the keys to my 65 coronet and have called around to see if I could find a locksmith that could do it but no in the area I am in was interested in doing it , even had a couple of the just hang up on me . I bought a ignition and trunk...
Just moved to Georgia and need to find a few good shops to set up my Dana and check out the short block on the crate Hemi I have in my AFX coronet . Live just outside of Atlanta , any help would be appreciated . Thanks John
1978 440 motor block with cast crank from a motorhome . I bought it and was going to build a stroker motor , sold one of my projects and no longer need it . Has stock bore and can still see hatch marks in the cylinders from the factory . I have deburred the block of casting flash . Asking...
Picked this gear set up several years ago with the intent to use in the Dana 60 I had under my 66 cuda funny car . It turns out to be a thin gear set used on a 4:56 and up carrier . I had to buy a new gear set . So I hope this will help someone that wants to go to a lower gear ratio . Richmond...