Search results for query: *

But it has something to do with heat treat. Copper isolates the steel from the carbon during the heat treat. I understand the small and large ends are heat treated, then machined, (obviously) whereas the beam is not. I would believe this over everybody saying the copper is to build up rods that...

You must have the "fork return spring" to pull the throw out bearing back after a gear change. The linkage isn't attached to the release fork. It's just a rod through a bushing. I think the over center spring is just to ease pedal pressure with a stock type Borg and Beck clutch. Has yours been...

It's for the heat treating process before carburizing. https://www.cp-carrillo.com/n-12112-carburized-rods.html

I appear less than average. Greg, it concerns me that you found this test to take in the first place. It also worries me that I took it too. :BangHead: :lol:

Order to from Amazon and get it Tuesday. If you need it and now, pay the price!

Start an ad in the WTB forum.

The outer seal is usually the one that leaks and requires the retainer and bearing to be pressed off the axle.

You didn't mention what application but Mega Parts has a bunch. Just type battery cable in the search. Mega Parts USA - Reproduction, NOS and Used Mopar Muscle Car Parts

I must live in a cave. I don't think I have ever watched it.

First things first, the original poster posted his phone number in the post. Scammers love to see that. Don't post any personal information directly on the site. Send it through a personal message if needed. He also started this thread in the wrong forum. He is looking for this particular car...

Here's a video advertising a machine. It looks slick but E X pensive! Boy, it does a lot of neat stuff though.

CNC ported isn't necessary for a performance build. Ported heads are. CNC is good for consistency in production.

Without any photos, you probably need a new set of rear springs. Call ESPO and put your order in. THey are a few months behind on filling orders. Air shocks and spring type overloads are just band aids for 50+ saggy old original springs. Longer shackles too.

When the pedal goes away, it needs an adjustment to bring the throw out bearing closer to the pressure plate which will bring the free play closer to the top.

That's a beauty. Looking for a 64 my self.

I'm a cheap date tonight. All these were $25 or less and 2 were 1.75's.

I also made the list a sticky in the electrical forum

That could do it.

57 and 67 have the same base. 57 is 3 candlepower and 67 is 4 CP.

Here's a link to Classic Ind. light bulb charts. Just scroll down to view. Mopar Lighting Guide - 1960-1976 Dodge & Plymouth Light Bulb Charts THere is A, 2 different B body charts by years, and E body charts.