Separate names with a comma.
there's a video over on yellow bullet about a '70 hemi cuda smoking the new stuff. must see for any mopar guy.
anybody had a serious bell housing run out and what were the effects?
I received an alert that my membership was upgraded. I don't know the who's or why's but if you read this i'm humbly grateful for what you've...
anybody know if the OEM 1/2 groove 383 main bearings are available anymore? the only thing i can find is the full groove truck bearing.
new set of kb184-.020 pistons with new seal power e-424k-20 rings, $400.lightly used (couple of hours run time on mounts) big block shumacher...
just did some testing of the mancini/carter 4845 fuel pump (supposed to be a 440hp replacement). i use a 440 block with a cam and fuel pump push...
anybody have any of the special big block single bolt factory cam bolt washers? i need a good one or two.
are there any good replacement isolators out there? i yanked the engine out of my r/t and would like to change the isolators; originals look...
my riding mower engine quit and has me stumped. it's a simplicity with 21hp B&S single cylinder. the engine has a pulse fuel pump but won't pump...
anybody going to the event june 25th-26th?
is there a source for the rubber ball joint boots/dust covers? sometime back i seen year one wanting over $100 just for the covers, yikes! (ain't...
just got a flyer about the show. march 5-6, indiana state fairgrounds.
i noticed over on moparts.com dwayne porter has posted some OOTB trick flow numbers.
anybody use them? any journal size problems where they have to be re-ground? my crank guy says stay away from them. what do you racers say? this...
anyone here ever do a cold vs hot valve lash check? i'm wondering what kind of differences your getting between hot and cold. my lash cold is all...
...still listening to the Allman Bros. brings back memories.
has anybody tried to put the '66 and later kick down linkage on a '65 or earlier cable tranny with the one piece kick down rod?
like the title says i'm looking for a '65 b-body big block automatic trans throttle cable bracket. not sure if '64 or earlier will work,....?
i'm trying to talk myself into buying a new crank. i don't really need a 4340 crank for what i want to do, but i don't have access to any stock...
i'm finally going to do it, new engine for my '65 coronet. taking the 6-pak engine out and doing something different. i'll keep the old block and...
