Separate names with a comma.
I think I have a set in the attic. What is wrong with the ones you have?
All set over here[ATTACH]
Thank you for the referral Jerry. We talked and after some consideration I will part out the setup I have.OP you have a PM!
Welcome, that is a cool car.I have stayed in Bishop a few nights over the years. Friendly town and nice country way down Hwy 395.
I would not expect much from a stock '66 383 4 barrel...much less from a 361. If it doesn't have 9:1 or better CR a bigger cam might have been a...
Do you have a part nu,ber for that pan?
https://www.summitracing.com/parts/mil-31581I like the external pickup version.
Call s and w and ask for 68 b body bars that go through the package tray. They sell them both ways.
Are you sure it isn't 2.200 on the rod journals? 2.100 is sbc. It looks to be drilled for a 4-speed?
That is local to me if anyone wants a set of eyes. For the right scratch I'll dyno it. I might be interested if it had the original accessories....
At the race track it means tagged and insured, no pro mods. You might have to take a 20 mile drive depending on the event.Whining to the...
Sorry to hear that. RIP to your Mrs.
I would be breaking out the sledge hammer.
I learned something new about 66 b bodies today! Apparently if a 361 or 383 was ordered in an area that required C.A.P. emissions the 26"...
I beat them on with a rubber mallet at room temperature.
That is pretty cool.
Does it have an 8.75? I have a nice original 3.23 SG with HD 11" finned drums if you need one for your project.Looks very straight for...
This is a first for me. Never saw a car go from East to West before!
We have been very busy at work due to the storm so not much in the way of progress. I am considering stabbihg a rebuit 383 long block in the car...
What do you measure the main bores with to make sure of them staying in the same place? Have you ever mic'd a box of main studs?