Separate names with a comma.
doesn't anybody think he should use a good break in oil and good fuel wouldn't hurt
[ATTACH] thought I would ask someone that would know
hell, I could run olive oil in my trans after I rebuilt it and swear to all of you it's great and eco friendly too ,but that's not going to be...
I was having shifting problems before I rebuilt it and changed the lube to GL4 made a noticeable difference , that's all I'll ever use now
all you really want is the block and maybe the crank then you take them down to your machine shop and he'll check the worst hole and see where you...
just turn it upside down and take the easiest rod loose and drive the piston out with a hammer and a board, repeat
They are both trouble free unless the plastic body on the thermoquad warps , the thermoquad is bigger and sounds really good when you open it up,...
I have a Dodge pickup with a 318 that would run fine and just shut down occasionally leaving me working on it from minutes to hours never really...
Static timing Basic
If it’s not on the compression stroke it will be 180 out or at 6 so pull the plug out put your finger over the hole and you’ll feel the...
No disassembly you just bring #1 up on compression stroke the timing mark on the balancer will still line up on the timing marks then take the...
I had a 413 the timing gear uses a woodruff key on the cam like yours My key sheared and the gear would move It would run good then stumble then...
are those black crinkle aluminum valve covers? I think they might be hitting the high points on the intake may need thicker gaskets
seeing how faint those numbers are I'm going to have to look again they could have been buried in paint when they rebuilt it
Ya being that close I’ll have to rebuild it with the correct crank and replace the input shaft It’ll be a good project for when I retire next...
it's got an automatic crankshaft in it , I guess they could have swapped it in a rebuild then they had to cut the input shaft on the trans if its...
I looked at the top of the block by the oil sending unit there was nothing there it was pretty clean , they stamp it by the bell housing don't...
should the vin number follow that ?
The pad on the front of the block is covered up too it’s a driver [ATTACH]
[ATTACH] Couldn’t find the cast date it’s still in the car with headers and power steering not sure what the build date is would have to look at...
