Search results for query: *

So I got the manifold back from Willson and test fit on heads. They are 440-1 (345cc). Chambers were worked on, then heads decked to keep CC correct. This was all done by INDY in their 345 cnc package. With a .015 gasket I can install bolts but they are at the very top of the slot hole (Meaning...

when is part 2 dropping?

Correction: You will lose play as disk wears, but will gain play when surfacing flywheel. I would think this would be minimal unless it needed a lot of material removed.

Your mail box is full How much to ship to 85374

Aren't the blue Holley gaskets supposed to be non-stick? Moroso also makes reusable non stick replacements.

MRE clutch rod ,washer, nut and spring (open kit.) No sure what else is missing. $35 shipped US

Location and size of my factory 1970 road runner hood.

As the disk wears, or, in your case surfacing your flywheel, you will lose pedal free play. This can be adjusted on the rod connected to your z-bar. If you have everything correct, when fully engaged, pedal should come up high enough that the over center spring will take the pedal up to the...

No need compression and vacuum gauage

PM sent

Conventional SAE 80W-90 gear oil works good for a A-833 I would not use Synthetic.

When I spoke with Dwayne Porter 6 years ago about possibly changing my Lunati Voodoo 60302 cam, I provided him all of the details of my motor and car. He told me he wouldn't change a thing. I was very surprised by his response and asked him why. He said it was mostly due to my pistons. I'm...

I bought this non adhesive harness tape many years ago and no longer need. I may have used some not sure. It says Plymouth Rubber Co on the inside if that means anything? $13 mailed US

Welcome aboard from Ohio.

*Steve Lisk

That’s the Linsky challenger, maybe wrong on the name. Full pro stock drivetrain running the streets of Detroit with the silver bullet

Sweet Ride!

Lost Muscle Cars

Pedal stop should be the same. Flywheel thickness has nothing to do with pedal height. Adjustment will change the air gap but the pedal height is controlled by the stop pad. The stop pad is fixed so if you took the rod off before you could pull the pedal up to where it is now. Your previous set...

I contacted Detroit and haven't heard back. I have bought many things from them and happy with their product line. I think they just missed on this one. Maybe they have it already figured out? I sat and stared at the flap thinking I must be missing something and didn't have the old one to go by...