Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
It's not all bad unless you make it so. It's just a personality trait that many have. Some have other traits on the list. According to the test I have a little of ot all. Does that make me better or worse than someone else? No judging here. Not my job.
I just poked around and read 1 turn to 2 1/2 turns. Not a clue. Recommendations ar all over the map.Others will chime in . I need to recind my half turn and say at least a full turn. :lol:
I don't know why the software even has Profile Posts. I have found all sorts of wrong stuff in them. People confuse them with personal messages. (inbox)
Yes you can check the accuracy against a known good torque wrench. That will get you close. May be within 10%. Really, for many applications, even torque is important. The ones I got calibrated when I was in the tool business, would be within 1 or 2% and were certified in case any accuracy...
The click type are most prone to going out of calibration and needing repairs. The Precision Instruments (Snap On style) aren't as accurate but they are easy to use and seem to stay in calibration longer. I believe they use a tuning fork mechanism in side.
I have seen a thread or two on A bodies. You have to find a volt gauge the same size and sweep that the original gauge is, disassemble it and put it in place of the original gauge. I will see if I can find the thread.