Separate names with a comma.
Do you soak new transmission bands? If so, how long? Thanks
Did all 65 B body big block oil pans have a baffle? I have two pans that supposedly are for a 64/65 big block engine. Neither has any number on...
Have trouble getting axles into sure grip. Can I loosen the bolts on the sure grip while it is still in the rear end and if so, do I then have to...
Having a problem with the installation of my axles. Pulled axles and was going to install new gears and rear disc brakes. Installed green bearings...
I see that people have changed their axle studs to Dorman's 610-103. Will these work for rear disc brake conversion? Thanks
Having trouble removing the park cable from the housing on a cable shaft 727. I loosened the pin, but the cable still won't budge even though the...
Anyone install a shift kit into a 1965 cable shift 727 with front and rear pumps? If so, whose kit were you able to use? Thanks
I have a 65 BB cable shift 727 from an Imperial that I need to change the tail shaft. The tail shaft doesn't have an opening to access the clip...
I have a tail shaft with casting number 2464217. Can anyone id this? Thanks
The 1965 727 BB cable shift transmission is a one year only with slip yoke. Can a '64 cable shift 727 be used in a '65 if the rear housing is...
I have an extra 1965 727 cable shift transmission for my '65 Belvedere, and a '74 727 core. If I rebuild the '65 727, can the '74 input and output...
Where can I find site to decode my 727 transmission? Thanks
Looking for gray 21 tooth speedometer gear for 1965 727 transmission. Thanks
Planning to install 3.55 gears in my 8 3/4 rear end, and will use 28" tires. My transmission is a 1965 BB 727 (one year only). What speedometer...
I'm working on a 1965 Belvedere II that will be used solely as a cruiser. The 273 will be swapped for a 440. It currently has its original open...
I have a 1965 big block 727 transmission that is missing the dip stick and tube. I have a dip stick and tube from a 1965 small block 904...
Can anyone decode this 727 number? F2464424 1126133Thanks
Swapping a big block in by early B Body, so the driveshaft will need to be shortened. I know that if I had a slip joint, the driveshaft length...
Doing a big block swap in a 65 Belvedere. I want to keep the column shift, but it used the one year only transmission with cable shift. I found a...
How many splines are there in a 1965 727 transmission yoke? I'm missing the yoke from mine. I know that the converter side has 11 splines. Thanks
