Separate names with a comma.
Looking over this car, it looks to have blue seats. The roof must be custom as there is no side "opera" windows and they gave it a full vinyl roof.
Thanks for keeping us updated in this thread. This will be the way I go when I get the rest of my motor completed.My question is, did you have...
Thanks for the reply. I will add that the 8 1/4 will work on a 9 1/4, as I just swapped mine last night.
Let me get this correct. You can interchange the backing plates 11" and 10" between the Dana 60, 8 3/4", 9 1/4", and 8 1/4".
I would also like to add that this has been a very informative discussion. :thumbsup:My question is what intake are you running on your engine?
Got a part # for that Denso?
Please post more pics when you get the car home.
Thanks for the information on the Imp. disk brake issues. I picked up a 9 1/4 with Imp. disks brakes minus the parking brake hardware. Thought...
Very interested in the specs. of both wheels and tires. Looks good!
Thanks for the link.
I have used white vinegar with good results getting rust removed. It dissolves the rust. I was shocked the first time I used it.
IQ52 thanks for the link. I never came across this in my searches on the iron vs aluminum debate. I have a 400 block machined for a stroker in...
I too have looked into aftermarket heads to raise my C/R on my 400. From what I have read is the 75cc aluminum heads will raise compression about...
KB240 pistions they have a .100 more compresion height to up the C/R. And come in over bore sizes....
A little project to teach the boy about mechanics. 77 smog motor all stock except (cam, intake, carb, and headers). Comp cam smallest thumper...
It's been a week, any updates?
Ok. Keep me in line.
I'm interested, so put me down in line.Edit: Just looked at the pics. Are these being sold bare?