Search results for query: *

I'm trying to figure shipping weight but I have a bad back and neck, can't lift them to put on scale right now

If ever there was a group of people who regularily abuse their necks and backs it has got to be the car nuts right? So I figured I'd ask... Looking for any input, opinions, rants, surgery experience. Before someone levtures me on why it's a bad idea to get advice form an anon forum, This is...

Great shape overall shape, they were blasted and painted by the previous owner for storgage, they need a 2 studs replaced but are otherwise ready for rehupohlstery. $350 for front and $80 for Rear.. or $400 for both + shipping These are not going to be easy to ship, so local pickup prefered...

I know these will work on 68-69 B Bodies, but most likely will work for other years as well. These are for those with Lower Control Arms that do not have the stock endlink tabs and should work to bolt up any sway bar. I have to say they are a hell of a lot beefier than the stock setup, I almost...

Nice little return spring setup for Holley style carb. I removed from the package but never installed. All hardware included $25 + shipping form Tampa

Missing Cable and a little beat-up, but will clean up nicely and the ratchet mechanism still works great. $80 obo + Shipping Location Tampa

Just as the add says, 80's vintage (I know, it does't sound right to me either :) Offy, aluminum, dual plane, model 360 intake manifold for a low deck big block. Located in Tampa $125 + Shipping

I swapped this out for a thicker Hellwig bar, thought about keeping it as it is one of the defining items of a 69 Roadrunner (no sway bar, no Roadrunner right?). However, I am running out of space and need to help pay for my engine build. This is all stock bar with brackets/bushings (No...

I went disc's and these are just taking up space. They are well used and dirty, but no major issues, cylinders could probably use new seals due to age and re-surface on drums. Comes with spindles, backingplates with brake assembly and drums. Longer wheel studs installed for track usage. Will...

I have a set of 4.56 gears in decent shape for a Dana 60 that I believe are original Spicers? $125 + Shipping Also have a spacer that allows you to use these on a 3 series carrier (3.55 - 4.10) otherwise you must have a 4 Series carrier to inteall (4.56 < ) $40 + Shipping Located in Tampa

Just as the add says, 80's vintage (I know, it does't sound right to me either :) Offy, aluminum, dual plane, model 360 intake manifold for a low deck big block. Located in Tampa $125 + Shipping

I picked these up from a well known vendor at the Don Garlits show 2 years ago to replace the worn set on my RR but never got around to installing them and now working on a stroker build with aluminum heads. These are ready to bolt on and go. Nice looking, proffesional stock rebuild. Set up...

ok so priceless is a bit overstated. What's a good price for avg condition 64 A-833? I'm gonna be honest, I have had, what I think to be a worthless 4spd, 1964 Ball and Trunion 70 lb. paperweight in my garage for 4 years. I'm looking to sell it to help fund my engine build, but I have no idea...

$40 I have the gas tank that was in my 69 RR when I bought it, I had a extremely bad gas leak (long story see my project thread for details).. I replaced the tank with a new one, turned out the problem was the sending unit seal and the tank I removed was spotless inside, zero rust, looked...

Dynomax 17749 Super Turbo mufflers $80 + ship from 33624 I bought these from Summit and squirreled them away for when I could do my whole exhaust.. turned out I bought the wrong ones for what I wanted to do. Unfortunately for me I held them too long and can not return them to Summit. Exhaust...

I'm looking to buy a motor. I have decided to either have a builder do it or go the crate route. I considered doing it myself, but I have only done low HP, stock rebuilds (and not the best work or problem free) and I really am shy on time to work on the project these days and would rather put my...

I have a neighbor that has an old 440 replacement block still with original tags on it that has never been built. It has been kept oiled down and wrapped in storage, looks in great condition. I am considering a mild 440 build and the price on this block is cheap... Am I saving myself machine...

So, the pitman arm I bought from PST doesn't want to torque all the way down on my Manual Steering 69 RR. The centerlink bar is sitting at an angle, lower on the pitman arm side than the idler arm side. I just found my old pitman (thought I had tossed it) and it is tapered in the splines...

Hey Guys, I've posted some of this is other sections on the forum without much luck. Hoping the race crowd, might have some knowledge they can lay on me. I bought and installed an AEM wideband UEGO gauge in hopes of dialing in my Holley 670 Vac Sec carb. Any help on interpreting results...

So I ran into a good deal (I think) on a stroker kit... not sure who the guy bought it from, I'm thinking Indy maybe. The cost on this may be too good to pass on. Here's the specs 440 - 500cui Eagle 4340 Steel Crank - stroke: 4.150 - 2.375 pin Eagle ESP H-Beam Rods (6.76 x .990 pin)...