Search results for query: *

We gave my son a 3d printer for his birthday, and while he is in school I get to print things on it. It is fast and simple to use! He is making spinners and spinner cubes and like things. So far, I've made a tic-tac gun, a wall holder for my Milwaukee drills, and the fuse box cover for a '78...

I don’t think I’ve ever seen one on a car, and a Mopar dealer on eBay I follow is selling them. I’ve got a 383, and live in crazy California, so would I need/want to have/add them? Are they necessary? 70 71 72 73 74 75 76 77 Mopar 383 400 440 Big Block Exhaust Manifold Heat Shield Thx!

USPS Rate Change July 2025 Starting July 13th, 2025, USPS is changing rates for most domestic services, including Ground Advantage and Priority Mail Updated today USPS announced rate changes for domestic services starting on July 13th, 2025. This year's changes are all over the place, with some...

I checked out the local Walmarts and Hobby Lobby stores in my area before they came out, and since they’ve been out and no luck. I even had my sister in southern, more southern California, check her local Walmart and Hobby lobby and no luck. I really don’t wanna buy on eBay because the prices...

I was reading my email from Motor1, and I read about oil testing. Oil Analysis | Blackstone Laboratories Here is the full article: How Oil Analysis Reveals Your Engine’s Secrets Blackstone Laboratories uses only a vial of oil to shine light on your engine’s...

Somehow, in rebuilding the headlight motor, the screws for the top and the electrical posts are misplaced. I went through the area they would be in, with no luck. They could be in the cabinet, but I'm not sure. Where can I get or what is the size and thread to secure the cap, and I'm sure I...

I found this on FB marketplace. Reasonable prices? I would have put this under engine/transmission/etc. Not mine! ………………….. Older rebuilt set of 440 906 heads with brass valve stem seals. Should be freshened up. $250 Also have 3 sets of rocker arms/shafts $100 each And a set of 452 heads...

Looking for the 'Right (Starboard) side Cylinder Head 4006452. I've got a left one that I want to match it to. I would also take a pair of these: 2406516 – 1964-1967, 361/383 B/RB-series big-block, 2.08/1.60 valves, 73.5cc, 300L I want one that is ready to go in and doesn't need to be...

Hey, happy Sunday! Looking for some advice for a future effort (maybe). I’ve got a 68 383 big block. Details: 2-22-68 2468130-12 LL The existing cylinder heads: Right (Starboard) 3462346 - ‘71-73 2.08/1.74 valves, 79.5 cc or .81.5 cc 3022 Left (Port) 4006452 - 76-68 2.08/1.74 valves, 83.1...

I don’t need another project, and I’ve already got a 1971 Charger SE, but see this one on offer up. Either the guys on crack or? Check out this item on OfferUp. https://offerup.co/BpOHMBD2ERb

Anyone ever bought one of these from eBay? Chrysler 8-3/4 - 8.75 Powr-Lok Sure-Grip Posi Power Lock 30 Spline. The seller has good reviews and the price is reasonable. Plus, I can pay via PayPal credit. Thanks!

Okay, hurry and make mistakes, but learn and do it right again and for someone else! Or, will I be okay with this setup. Street and cruise '71 Charger with an 8 3/4 rear (3.23 diff). I pulled the axles, bought Green Bearings from DR. Diff, followed the post on removing the old retaining rings...

Is something going on with DR Diff? Or, is it just an odd time of year or something. I went looking for a 8 3/4" Pinion Snubber - out of stock 8 3/4" Helical Gear Sure-Grip ("Sure-Trac II") - out of stock 8 3/4" Clutch Type Sure-Grip ("Powr-lok") - out of stock I'm in no hurry, and I put some...

Everything on my '71 Charger SE has been good or best, and I haven't found one issue with anything yet, nor do I expect to. Anyways, I pulled the rear diff apart, and all looks great! No rust, and well covered in oil. I found a very little metal shaves, but see nothing ground in the gears, no...

Anyone ever used one of these? Thoughts? Kind of costly at $25 plus on Amazon, but maybe a good seal and forever? https://a.co/d/c4oCLAa

Likely will put this together over the weekend. How tall should the uprights be? Thanks!

We've rebuilt and strengthened the K-member, the lower control arms, the upper control arms will be PST. The brakes are being converted to disc (from drum) and we have all the components for this, and everything else (PST included) to put it all back together and ready for the motor and...

Picking this up from a friend tomorrow who doesn’t want it in his garage anymore. It runs slow, so I’m going to restore it and probably then sell it. Anyone know anything specific about it?

With my SE Charger ('71) I got some roller wheels and tires. I don't know a lot about sizing for wheels and tires (rely on a friend, or use an automated tool), so this is educational too! The wheels are old style Cragers, so I'm deciding if they are worth restoring and using on my '71 Charger...

This definitely could have gone in the ‘What did you do other than work on your Mopar today’, but it needed to be done! https://www.ebay.com/itm/176645984184?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=QtWyWqxTQD-&sssrc=4429486&ssuid=QtWyWqxTQD-&var=&widget_ver=artemis&media=COPY Racing...