Search results for query: *

So I have a 68 charger with a crate 5.9 in it and a edelbrock 600 carb. Running an orange box and single ballast with electronic distributor. I've had this car running as recent as 3 weeks ago w no issues. Now today I go to start on body work and no start. Fuel had gravitated back to tank so I...

Hello, I have a 68 charger with a crate 5.9 and mild comp cam in it. I am running a 600cfm edelbrock carb. I recently got engine to start and hold idle after working out some ignition issues with your help. My question now is I have drops of water from exhaust even after engine is warmed up and...

Hey guys, i really need some help here so it may be lengthy i'll try to be as brief yet detailed as i can if you need more info just let me know. I have a 68 charger in restoration process. The original 318 is toast so i dropped a crate 360 LA 5.9 in it. Brand new painless wiring harness...

Hello I am currently running an edelbrock 600 carb on my 400hp 5.9 crate engine. Is this too much or too little carb for a 400 horse 360. I can't seem to get the mixture right us my issue. I've added a pressure regulator and still can't get the sweet spot on mixture screws. Any help would be...

Hoping someone can help I dropped a 5.9 crate into my 68 charger. Hooked it all up and I'm getting spark and it'll fire but die immediately. I'm running a points style ignition setup w ballast resistor. Had an electronic but couldn't get spark w it. Any suggestions would be appreciated on...

I bought a 360 5.9 casting(53020006-360) for my 68 charger. I'm using an a904 trans and need to know which flex plate is correct? Will the one from my 318 or 440 work? Thank you.

I'm just curious as to why there aren't many repro parts available for the 68-70 charger? This was/is one of the most popular mopar sever made so how is it that parts are so scarce? Seems every time I look for a part for my 68 I can't find it anywhere. Just frustrated at this point .

Hello, i have a 68 charger SE w a 318 that is bad. Can i swap a 360 into this car without changing rearends and K memebers? I know the 318 is internal balance and 360 is external. Just looking for some advice as to whether or not this will work. Thank you.

Ok here goes I started w a few issues on my 68 charger 318 and now I have many. Problem one, car will start but stops running immediately unless I hold the key in the crank position. Problem two, battery is getting overcharged upwards of 16 volts, almost blew it up the other day. I have new alt...

Hello I have a 68 charger 318 5.2 which has a Thompson style steering pump. Bought a rebuild kit and have most do it apart but not sure how the pulley shaft comes off. Any help would be appreciated. Also, are the federal and Thompson pumps interchangeable with the reservoir? Would anybody happen...

Quick question! Would anybody happen to know the ohms range on a 68 charger 318 fuel gauge? I'm building a new cluster and want to make sure I get the right one! Thank you!!!

Would anyone happen to know where i can find a fuel filler neck for my 68 charger. I found some for b bodies but they all say except charger.

Ok so on my 68 charger equipped w front 10" brake drums I just finished changing upper and lower ball joints, inner and outer tie rods, shocks, drums shoes and hardware. Now I have a horrible negative camber on the passenger side and sounds like drum is rubbing on something bad? Anybody have any...

Can anybody tell me if an 11" drum will work w a 10" brake setup? I must have ordered the wrong size drums and not sure if I can keep and use or if I should send back for the tens? Thank you!

Ok so I have a 68 charger w a 318 bored over 30 with an edelbrock 4bl carb. I recently put new plugs and performance wires in it as well as a cap and rotor. Now before starting it back up I ran mixture screws on carb all the way in and then backed out a turn or so. Now the engine is backfiring...