Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I’m looking for a 1973 B-body Big Block k frame to replace the rotten one in my Roadrunner. Moisture got trapped in between the body mounts and the frame. One of the four mounting points lost most of its metal when I took out the bad rubber mounts. Thanks in advance!
Anyone have an idea of where I can get the circular clips that hold the seat buttons in place? Please see attached picture for reference. Thanks!! I don’t even know what they are called.
Highly recommend Evans Wiring Harnesses! Bought the forward engine harness for my 73 Roadrunner a little over a year ago and I think it’s as close to the factory as you can get 46 years after it was manufactured. Now I’m converting the car to fuel injection and I have to make my own harness...
Here it is: where should the lifter on a hydraulic flat tappet cam sit on the lobe? Does it rest dead center of the lobe or toward the timing chain side of the lobe?
I ask this because of what I’m seeing on my car which is the lifter only riding on the front half of the cam lobe as the engine...
I’ve got a Lunati Bracketmaster II cam installed in my 400. As per the specs on the cam card, it calls for a valve spring with an installed height of 1.820 @ 120lbs open load. I’ve got a set of PAC springs Hot Rod 1900 that I want to use that call for a 1.880 installed height @ 98lbs open load...
I took the intake off of my 400 (Performer 383) for cleanup and painting and I’m noticing a pretty reasonable build up of unburnt fuel collecting in the EGR runners. I’m not using an EGR valve on the engine so I’m wondering if there is any benefit to blocking off those runners permanently and...
Were the engine call out decals on the hood of the 73RR a different color than the stripe? For example, a black stripe with white engine call outs or black with black call outs. I would think they should be a contrasting color but I've been wrong before(my wife likes to point this out...
I'm sorry in advance if this question has been asked and answered in another post. I didn't see it when I was searching.
Are these cars supposed to have 2 horns or just one? My car has one purple one mounted on the passenger side and a black one mounted on the driver's side. They are both...
I bought a set of PRW rollers with shafts, shims etc. from a vendor on Amazon that was listed as brand new. The vendor sent me an open box, the pushrod checker was obviously used and everything in the box was disturbed, plastic tray was all broken up. It looks like to me that someone mocked it...
73 RR, 400ci 4spd. When attempting to find out what the timing was, I discovered that at TDC- rotor pointed to #1 position on the cap, piston stop verifying piston location at the top of cylinder and this is happening immediately following #1 cylinder intake valve closing and exhaust valve...
I got a full set of painted racing mirrors from Carlisle. I separated the pedestal & housing and removed the mirror mechanism. Of course someone had tried and failed this at some point and I ended up drilling out one screw inside the housing for the mirror and one screw for the pedestal-to-...
So I'm working on my 73 RR 400ci. I have no idea what's inside the engine as I only bought the car a few years ago. Here's the dopey question which I will qualify after I get some responses: when turning the engine by hand at the balancer for determining TDC, what direction do you spin the...
Here is the down and dirty:
Shifted the car from 3rd to 4th, loud bang, clutch pedal stays on the floor.
Towed the car home, found the throw out bearing had exploded.
Pull the car apart, found quite a bit of damage- worn out clutch, front bearing seal retainer was broken completely...
Did the 71-4 b bodies come from the factory with the ECM mounted to a bracket and then the bracket was mounted to the firewall? I know E bodies are set up this way? Thanks!