Search results for query: *

Looking to make my Throttle return Spring and Kickdown linkage spring correct for my 69 440 Charger. From what's for sale out there I believe the throttle return to be grey...still not sure about the kickdown linkage. Can anyone help me interpret the parts manual and the correct part number on...

Good Day All, In need of some guidance. As the title says....been fighting with a 440 to get it right. It's a newly built engine in the last year or so. A little bit of porting, comp cam #21-223-4. Nothing too crazy. Stock Heads. The engine ran good, not perfect...a stumble off the line...

Please tell me if I have this correct or not. A) The Tang on the choke spring as in the posted picture (it's just an image from the net) as the choke spring heats up and the tang moves downward....it DOES NOT drag the rod down...only the choke pull off vacuum pulls the choke plate open, and...

Good Day All, Trying to set up a Carter 4429S on a newly redone 68 440 with just a mild street cam. Moderately familiar with the AVS. Background.... 1. The ignition system is all good. New fresh distributor in, timing set at 15 degrees...idles smooth. 2. Fresh carb rebuild from woodruff...

Good Day All, So more AVS questions..... Dismantled a Carter 4618S yesterday from a 440 car. Engine has a small cam, a little porting, standard intake manifold. Runs very well. Engine was rebuilt very recently. The primary jets are the Standard 120-501 (.101) and the Secondary's are 120-395...

Good Day all, As per the title....69 Charger...Low beams work perfect on both sides (1 bulb on each side)....but when i switch to high beam...both lights come on as they should on the drivers side....but no lights at all on the passenger side (both bulbs off). Any suggestions? Thinking not...

As per the attached photo from an old service bulletin....does anyone know what suregrips got the tags vs ones that did not? What is the clutch vs the cone type? Hence different fluids? Late night nerd reading! macdon221

Anyone have an online source for Vacuum Break Choke Pull off rod for a Carter 4429S? The rod that links the vacuum diaphragm to the Choke linkage....with the "U" shaped bend in it. I have looked all around and cannot find a place to buy one. Or maybe someone has one to sell? Thanks Macdon221

A long shot like always... But looking for the engine for my 1969 Dodge Charger RT. It is a Canadian Car R4 red with red interior and vinyl top delete. The engine was replaced with a 72 block not long into it's life. The replacement engine was remanufactured at "Prairie Reman" in Winnipeg...

A few questions about Carter AVS jets.... The primary jets in my carb are listed as 120-501 (0.101)....in the CARTER parts book listed as "Tall Jets".....what is the compatibility for these jets? Do you "need" the tall jet for the 3 step rods? Can you use just a "regular" 0.101 jet (120-401)...

Hello All, Where would one look to buy carb parts for a Carter AVS 4618S? Looking for primary jet (0.101). Are these some type of "Tall Jet"? I seen something about that somewhere. Secondary Jet (.095) Low Speed Jet #65-0.031 Step up rods 16-545. Any help or website you can suggest...

Good Day All, Carter 4429S....On a 68 440 with stock intake manifold. The carb was restored by one of the recommended carb rebuilders on this site. The carb works fantastic and looks great. Idles great and runs perfect though all ranges of power. No issue. I went through the service manual...

Does anyone have an recommendations for a car/classic car transport service in Canada? From Nova Scotia to Manitoba. Enclosed preferred. Would appreciate any info. Thanks Macdon221

Good Day All, What am I missing here...68 Bbody Spindles....the description from DMT says it fits ""66-72 A, B, C and E bodies. Small 1-1/2" spindle hole. Have another listing for large 73-76 spindles with 1-7/8" hole"...

Good Day, I see two styles idler arms listed for 68 Charger...one is straight with no curve in it when looking at it from above as if installed....and another that has a slight curve in it again when looking at it from above. I see the same thing in new parts as well as old NOS parts. The...

Good Day All, A quick question I cannot seem to find the answer too... The Idler arm...is there a grease cup that goes on the end of the idler arm that bolts into the center link...or is there just a "foam washer" that goes between the arm and center link? It seems I have seen both in...

Good Day all, Does anyone have a 68 Charger Strut Rod lying around that they could measure for length end to end? Part number 2462 585 if required. Thanks Macdon221

Good Day All, Looking to put a lift in my garage. I have 14 foot ceilings. 110 or 220 V power is available. The purpose is mostly to get the car up out of the way for winter to store items underneath....but also to eventually do some work on the car. What's your experience with either and...

Good Day all, I have perfect outside condition 68 charger/barracuda gas cap that is missing the spring loaded plunger piece. Is is possible to remove just the "spring loaded plunger seal" seal section from a poor condition cap and place it on another gas cap that is in great show condition...

Good Day All, I need a replacement turn signal switch for a 69 Charger. Tried to just replace the Cam with a Shemar one, but it still just does not work correctly. So going to replace the entire harness. Which of these three do you all recommend... 1. From Daniel Stern Lighting Daniel...