Search results for query: *

Friday I became the caretaker of a friend's '70 RR for the summer. He recently added an aftermarket radio and says when he turns it on it 'pops' with a loud sound that is very painful to the ears but then the radio plays as normal. He has no idea what's going on. I want to be a good steward...

I just unearthed a new Mopar Performance single bolt roller chain & sprocket set (P4120264) in perfect condition except for the 20-year collection of dust on the outside of the package. I went to check on what this was selling for and I can't find it. An interweb search turns up a couple...

New in the box. Part #: 7100.990.2200.8740-H Block Type: RB Series: Platinum Center-Center Length: 7.100" Rod Type: H Beam Journal Size: 2.200" Wrist Pin Size: .990" Big End Width: .994" Bolts Used: ARP 8740 190,000 PSI Approx. Weight: 790-800 440Source gets $699.95 for these. Buy mine for...

I've got a fellow trying to sell me what appears to be an older Holley HP carb but doesn't know anything about it. Only numbers I can find are on the air inlet lip - 6R 7921 B - as the picture indicates. What is this? Any help would be greatly appreciated.

NIB Arias forged aluminum pistons, piston pins, & pin locks for a 426 Hemi based naturally aspirated 500" stroker. Use these with a 4.150 stroke crankshaft and stock length Hemi connecting rods for 499.10" displacement. Selling because the block didn't clean up at the finished bore size...

As the title says, new Indy ModMan MPEFI intake with fuel rails for OEM heads. Indy Part #426-I4-MMBOEFI. Indy retail: $1285. Buy mine for $999 with free shipping from 99201. PayPal F&F, money order, or check (must clear before I ship). PM me here please. Thanks for the ad space FBBO!

This is another 1200 cfm 4500 base multiport EFI throttle body that needs a new home. Once again I need to find the spec sheet for throttle plate size, etc. $329 with free shipping from 99201. PayPay F&F, money order, or check (will need to clear before I ship). PM me here please. Thanks...

Purchased to use with M1 intake I'm selling but those plans have changed. I'm trying to run down the paperwork and will add the info when found. Pictures should do for now. Everything moves as it should, linkage & throttle shaft are solid. High luster finish. $329 with free shipping from...

I bought this eons ago from a Mopar guy in Zambrota MN. It appears he removed it from his engine, boxed up, and sent it as is - but it is very clean inside. The intake is for standard port heads. Could they be opened up? Dunno. PO used some gray RTV in lieu of intake gaskets. I haven't...

I dug out set of custom Ross pistons in response to a 'Wanted' thread here and I believe he passed on them, but it got me to thinking, why did I get these in the first place? They are pop top slugs with a 4.28 bore but a compression height of only 1.732. Wrist pin hole uses a stock big block...

KB (now Icon) forged pistons. 4.375 bore 1.322 ch +4.5cc valve reliefs .990 pin 1/16 1/16 3/16 ring grooves Summit gets $675, buy these for $499 + minimal shipping from 99201. PayPal FF or USPS money order. PM me here please.

Briefly used on a small block application without issue, was going to pair this kit with the CH-28 intake for a street driven B-body but sold the project and this is what's left. Excellent condition. $849 + free shipping from 99201. PayPal FF or USPS money order please. PM me here.

For Sale: Edelbrock CH-28 dual quad intake (#5440) for RB (440/413/426W) engines. New in box. Summit gets $504.95 + tax; buy this one tax free for $439 with the same free shipping from 99201. PayPal FF or US Postal Money order. PM me here please.

I know rollers are the cam du jour but here is a new in the box Mopar Performance purple shaft 324*dur/.620" lift solid flat tappet race cam & lifters for RB/B engines. Purchased from Summit in 2002, I've had it since 2014 and will not be using it. Cam & lifters only, bottle of cam lube is...

Digging around the back of the shop & I found a new set of K-Motion K-850 dual valve springs. I'm thinking about using them with a MP aluminum Hemi head & 238/249 @ 050, 520/511 lift SFT cam. According to the catalog, K-850s are 135# @ 1.900 installed & 419# @ 1.250 open. Anyone have real...

SOLD Lightly used Crane Hemi hyd roller Grind: HR236/359 Adv dur: 298/302 Dur @ .050: 236/240 Lift: .564/.555 LSA: 112 From Crane: "Good mid-range torque and HP, street Hemi and Crate Motor upgrade, fair idle, mild bracket racing, auto trans w/3000+converter, 10.0 to 11.5...

New unopened box, Moroso #73841 unsleeved custom fit wire set. Moroso says they are the most powerful & RFI/EMI-resistant wires available for racing today. Their closely woven fiberglass, silicone-impregnated insulation provides up to 8,000 extra volts of protection. Features: * Kevlar® core...

I'd really like to get a set of eyes on this before getting on a plane to see for my self. I trust members here because of the FBBO community support & tech expertise I see in other posts. I'd like to know how much rust is actually present including the underside and frame rails. I know in...

I'd like a 1967 or '68 roller and this one is intriguing - at least at first blush. Ad says there is rust down low & given its location (rust belt), I wonder what the road salt has done to the floors and frame rails. Does anyone know this car or have you been by to look at it? Any info would...

Dipping my toe into the multiport efi pool and need some advice please. I have an intake, fuel rails, injectors, throttle body & FAST dual sync distributor. What else do I need? Looking for direction/suggestions re: ecu, wiring harness, O2 sensor, etc. Any help would be greatly appreciated...