Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I have everything you need to convert your hardtop to a post car.
Everyone knows, posts are the coolest!
Simple to weld in the post. Your probably doing metal work anyway.
There are some scratches on the inside of drivers glass.
Comes complete with the desirable decor package stainless for the...
They are cores. The retractor belts have curl, buckles and tongues need to be rechromed.
The buckles are in good condition for chroming.
New use for ultrasonic cleaner. While belts were hot, I slid the rear seat stifferers and retractor covers up.
4ea C-7, C-9 bolts.
The stainless springs get...
Suprise! I opened the cap and no breaker plate or pickup.
Part number is for dual point, but has the unilite rotor.
Like new condition with new rotor and low use cap.
Has directions for converting to unilite.
Repair your dual point into this, or add a unilite or pertronix pickup.
$50+shipping
Not something you see often, so no idea if there is any demand. These are in nice shape.
Chet's has a rough set on ebay with pivots, so I'll put these up at $150 shipped.
Includes the squirters.
70-71 with rectangular mounting boss for wheel cylinder.
No rust on stub shafts. Wet picture with solvent shows no pitting on backing plates, or funky wear on shoe pads.
Comes with the 2 small top bolts (backing to spindle) wheel cylinders bolts, (cylinders too, but they are frozen) and manual...
Bare case. Clean. Your choice of tailshaft,standard with bosses for console shifter, or the heavy duty truck unit.
Nothing special numbers.
Buy this and swap your small block guts into it. If you need other parts to fix yours, let me know.
$100 + shipping or pickup
Before I pulled the mount and tank to clean, I poured atf in and hand turned. It pumped fluid and made a mess.
I cleaned the tank and mount, no rust or dents. I'm sure you would want to do the 2 orings, but front seal should be fine.
Large pulley.
$60 PP f+f. And ship
I have a (L to R) 71, 72 and 73-4 latch support. They are all different, and different than plymouth.
How about $20 for any to make it worth boxing and driving to the PO?
These cars are not out there any more either, but if you need this, you might need a bumper and grill. Got that too.
Complete set of rockers and shaft. They don't need a cleanup. They have been through the ultrasonic cleaner.
The valve tips have been hit with a scotch brite roll lock disc. No concerning valve tip wear.
$100 and shipping.
I have 68 up low deck pushrods OR
67 and earlier style for $20 a set.
They don't need a cleanup. They have been through the ultrasonic cleaner. Complete, with hold down bolts and spacers.
Shafts are checked for scoring. Rocker tips are good.
$80 and shipping
Add a matched length set of pushrods for $25
Complete with brackets and spacers.
True early reservoir body. Not like the later ones that have the body go to the cap.
Early brackets are different also, although the difference is only a different belt lenght.
Shown on a small block with the correct pullies so you can confirm fit.
Pulled...