Search results for query: *

Hi all After some head gasket advice. Have searched the forum but cant seem to find an answer. Have an overheating of 440 looks like it was caused by non sealing head gasket. Heads were badly milled, some head bolts seemed a bit loose around middle cylinders, motor had standard felpro gaskets...

Looking for some advice from the knowledgeable people here. Have had the heads removed from 60" over 440 after confirming engine had a combustion leak, after eliminating other overvheating causes. The engine also had some oil in coolant but no coolant in oil. Was hoping the head gaskets may...

Hi all Looking at replacing 906 heads on 69 440. (Mechanic thinks the car has a cracked head as has a combustion leak and some oil in coolant). Just looking at my options before getting the heads removed( have a spare block in case there's issues there). As you can see from the pictures, the...

Hoping to get some thoughts on Cragar SS rims on early brake drums. Have multifit 15 x8s on the rear of 1963 tapered axle diff. Have been getting some weird noises that sounded like they were coming from the rt rear hub. Pulled the wheel off and it looks like one of the balance weights on the...

Just wondering what is the opinion on.hi flow water pumps? Searching the posts on here, seems there is some debate that hi flow doesn't always mean cooler temps? Looking at Koomaster, Milodon and Edelbrock Victor, all sound good on paper. Anyone had experience with these brands, particularly the...

Have a trans leak on 65 727 cable shift. It is leaking from where the park cable goes into the transmission. ( Someone has put some kind of tape over it in the past, as you can see from photos). I have read of a few fixes on here. But have a few questions. Is there anything tricky in removing...

Hi all Have an Australian version of the1963 Dodge 440. The cars were imported to Australia dissambled and marketed as Dodge Phoenix. They appear to be the same car, with exception being they were made as right hand drive. The only engine option was a 318 poly with torqueflite. My question is as...

Hi all, I am trying an old single point distributor after having timing problems with the cheap ready to run distributor that came with my car. Will be upgrading in the next few months but want to try and make this work for now. There appears to be some play somewhere, but not noticeable with...

Hi all Hoping someone can shed some light on this distributor. It has number IBS 1014 A on the body. It's a dual point for Rb block as far as I know. It's for sale and would like to know what I'm buying beforehand. I assume it will work on a 440 block, but cant fund much info. Thanks in advance.

Just a quick introduction, am.new to b body big block world. Thanks to admin for adding me to the forum. Have bought a Dodge Phoenix ( australian version of Dodge 440)with hp 440 block and in the process of restoring and tuning. Car runs but needs sorting. Is more of a rat rod at the moment but...